JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE)

• Articles • Previous Articles     Next Articles

A new technology of machining cylindrical helical gear

WU Junliang1， AN Ping2， SUN Wenhao2   

  1. 1. School of Civil Engineering Shandong University,Jinan 250061，China;2. School of Mechanical Engineering,Shandong University,Jinan 250061,China
  • Received:2005-08-20 Revised:1900-01-01 Online:2006-08-24 Published:2006-08-24
  • Contact: WU Junliang

Abstract: A new method to machine cylindrical helical gear with minority number of teeth (2～5) and small diameter on spline miller is described in this paper. The effectiveness of this new method can be improved by 10 times compare to that of traditional machining on gearhobbing machine. The expressions of undifferentical side set change speed gear about machining cylindrical helical gear with spline miller are given as well as the expressions of side set change speed gear ratio. As a result, the gear precision can be improved by the technology of high speed honing and the degree of roughness is Ra0.4, which attributes to preventing the undesired sound of gearing mesh from being higher than 70 dB.

Key words: spline millerr, undifferentical side set , cylindrical helical gear with minority number of teeth and small diameter

No related articles found!
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LI Kan . Empolder and implement of the embedded weld control system[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 37 -41 .
[2] LAI Xiang . The global domain of attraction for a kind of MKdV equations[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 87 -92 .
[3] YU Jia yuan1, TIAN Jin ting1, ZHU Qiang zhong2. Computational intelligence and its application in psychology[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 1 -5 .
[4] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[5] WANG Bo,WANG Ning-sheng . Automatic generation and combinatory optimization of disassembly sequence for mechanical-electric assembly[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 52 -57 .
[6] ZHANG Ying,LANG Yongmei,ZHAO Yuxiao,ZHANG Jianda,QIAO Peng,LI Shanping . Research on technique of aerobic granular sludge cultivationby seeding EGSB anaerobic granular sludge[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(4): 56 -59 .
[7] Yue Khing Toh1， XIAO Wendong2， XIE Lihua1. Wireless sensor network for distributed target tracking: practices via real test bed development[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 50 -56 .
[8] SUN Weiwei， WANG Yuzhen. Finite gain stabilization of singlemachine infinite bus system subject to saturation[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 69 -76 .
[9] SUN Yu-li,LI De-fa,ZUO Dun-wen,QI mei . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(6): 19 -23 .
[10] WANG Yong, XIE Yudong. Gas control technology of largeflow pipe[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 70 -74 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd