Journal of Shandong University(Engineering Science) ›› 2024, Vol. 54 ›› Issue (6): 130-138.doi: 10.6040/j.issn.1672-3961.0.2023.209

• Electrical Engineering • Previous Articles     Next Articles

Analysis of the effectiveness of anti-dancer with the reduced pitch in high wind area of the Lanzhou-Urumqi high speed railway

LI Yanzhe1, ZHOU Chengxi1*, ZHAO Shanpeng1, YANG Yimeng2   

  1. 1. School of Automatic &
    Electrical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, Gansu, China;
    2. Beijing Hollysys System Engineering Co., LTD., Beijing 100083, China
  • Published:2024-12-26

PDF (PC)

73

CLC Number: 

  • TM93
[1] 黄双林. 兰新高铁防风标准研究[J]. 铁道工程学报, 2019, 36(6): 14-17. HUANG Shuanglin. Research on the wind break standard of Lanzhou-Urumqi high-speed railway[J]. Journal of Railway Engineering Society, 2019, 36(6): 14-17.
[2] 王争鸣. 兰新高铁穿越大风区线路选线及防风措施设计[J]. 铁道工程学报, 2015, 32(1): 1-6. WANG Zhengming. Design of route selection and windproof measures for strong wind-hit section of second double line of Lanzhou-Urumqi railway[J]. Journal of Railway Engineering Society, 2015, 32(1): 1-6.
[3] 张友鹏, 王彤, 赵珊鹏, 等. 兰新高铁大风区段挡风墙对接触网正馈线气动特性的影响[J]. 铁道科学与工程学报, 2019, 16(7): 1628-1636. ZHANG Youpeng, WANG Tong, ZHAO Shanpeng, et al. Influence of wind-break wall on aerodynamic characteristics of positive feeder of overhead contact line of Lanzhou-Xinjiang high-speed railway[J]. Journal of Railway Science and Engineering, 2019, 16(7): 1628-1636.
[4] DEN HARTOG J P. Transmission line vibration due to sleet[J]. AIEE Transactions, 1932, 20(51): 1074-1076.
[5] NIGOL O, BUCHAN P G. Conductor galloping partⅠ:Den Hartog mechanism[J]. IEEE Transactions on Power Apparatus and Systems, 1981, 100(2): 699-707.
[6] 晏致涛, 黄静文, 李正良. 基于结点6自由度的分裂导线有限元模型[J]. 工程力学, 2012, 29(8): 325-332. YAN Zhitao, HUANG Jingwen, LI Zhengliang. Finite element model of bundle lines based on 6-DOF node[J]. Engineering Mechanics, 2012, 29(8): 325-332.
[7] 张龙, 黄珏, 钟永力, 等. 钢芯铝绞线的拉扭耦合力学性能[J]. 西南交通大学学报, 2021, 56(4): 889-896. ZHANG Long, HUANG Jue, ZHONG Yongli, et al. Mechanical properties of tension-torsion coupling in aluminum conductor steel reinforced[J]. Journal of Southwest Jiaotong University, 2021, 56(4): 889-896.
[8] 赵建平, 艾红, 王欣欣, 等. 风沙流对输电导线风荷载的影响[J]. 电工技术, 2018, 467(5): 14-16. ZHAO Jianping, AI Hong, WANG Xinxin, et al. Effects of wind-sand flow on wind load of conductors[J]. Electric Engineering, 2018, 467(5):14-16.
[9] 韩枫, 肖正直, 李正良, 等. 1000 kV汉江大跨越输电塔线体系三维脉动风场模拟[J]. 高电压技术, 2009, 35(5): 999-1004. HAN Feng, XIAO Zhengzhi, LI Zhengliang, et al. 3D stochastic wind field simulation of 1000 kV Hanjiang long span transmission line system[J]. High Voltage Engineering, 2009, 35(5): 999-1004.
[10] 王侠, 晏致涛. 覆冰导线在斜风下的气动力特性试验和数值模拟[J]. 土木建筑与环境工程, 2012, 34(增刊1): 88-91. WANG Xia, YAN Zhitao. Numerical simulation of dynamic test of iced conductors under skew wind[J]. Journal of Civil Construction and Environmental Engineering, 2012, 34(Suppl.1): 88-91.
[11] 张友鹏, 王鹏, 赵珊鹏, 等. 大风区段接触网多跨距正馈线舞动特性[J]. 高电压技术, 2022, 48(9): 3612-3623. ZHANG Youpeng, WANG Peng, ZHAO Shanpeng, et al. Galloping characteristics of catenary multi-span positive feeder in gale areas[J]. High Voltage Engineering, 2022, 48(9): 3612-3623.
[12] 王玉环. 兰新高铁大风区接触网正馈线悬挂结构适应性分析[J]. 铁道标准设计, 2018, 62(3): 124-127. WANG Yuhuan. Adaptability analysis of suspended structure of overhead contact line in wind areas along Lanzhou-Urumqi high speed railway[J]. Railway Standard Design, 2018, 62(3): 124-127.
[13] 张友鹏, 张宸瑞, 赵珊鹏, 等. 兰新高铁大风区段接触网正馈线斜拉绝缘子防舞有效性分析[J]. 高电压技术, 2020, 46(11): 3905-3913. ZHANG Youpeng, ZHANG Chenrui, ZHAO Shanpeng, et al. Anti-galloping effectiveness analysis of positive feeder cable-stayed insulator of catenary in strong wind area of Lanzhou-Urumqi high-speed railway[J]. High Voltage Engineering, 2020, 46(11): 3905-3913.
[14] 雷娟棉, 谭朝明. 基于Transition SST模型的高雷诺数圆柱绕流数值研究[J]. 北京航空航天大学学报, 2017, 43(2): 207-217. LEI Juanmian, TAN Zhaoming. Numerical simulation for flow around circular cylinder at high Reynolds number based on Transition SST model[J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(2): 207-217.
[15] 谢献忠, 刘赛, 王文军, 等. 输电线脱冰动荷特性试[J]. 湖南科技大学学报(自然科学版), 2019, 34(1): 70-76. XIE Xianzhong, LIU Sai, WANG Wenjun, et al. Experiment study on the properties of dynamic load of power transmission line induced by ice shedding[J]. Journal of Hunan University of Science and Technology(Natural Science Edition), 2019, 34(1): 70-76.
[16] 崔伟, 严波, 杨晓辉, 等. 双分裂导线间隔棒防舞数值模拟研究[J]. 振动与冲击, 2014, 33(20): 47-51. CUI Wei, YAN Bo, YANG Xiaohui, et al. Numerical investigation on anti-galloping of double bundle conductors with interphase spacers[J]. Journal of Vibration and Shock, 2014, 33(20): 47-51.
[1] Bo ZHANG,Feng LU,Hanyu DONG,Qingtai CHEN,Zhenzhi LIN,Hongtao WANG. None-consumption users filtering algorithm based on decision tree and data-driven methods [J]. Journal of Shandong University(Engineering Science), 2019, 49(5): 29-36.
[2] ZHANG Hui,WANG Zhi-chen,SUN Rui . The traditional instruments performance optimization by virtual instrument technology [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(1): 24-27 .
[3] CHEN Zhiru, GUO Liang, DU Yan, DONG Xianguang, LIU Ningning. Comprehensive evaluation of metering system based on improved analytic hierarchy process [J]. Journal of Shandong University(Engineering Science), 2022, 52(6): 167-175.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Su-yu,<\sup>,AI Xing<\sup>,ZHAO Jun<\sup>,LI Zuo-li<\sup>,LIU Zeng-wen<\sup> . Milling force prediction model for highspeed end milling 3Cr2Mo steel[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 1 -5 .
[2] ZHANG Yong-hua,WANG An-ling,LIU Fu-ping . The reflected phase angle of low frequent inhomogeneous[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 22 -25 .
[3] LI Kan . Empolder and implement of the embedded weld control system[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 37 -41 .
[4] KONG Xiang-zhen,LIU Yan-jun,WANG Yong,ZHAO Xiu-hua . Compensation and simulation for the deadband of the pneumatic proportional valve[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 99 -102 .
[5] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[6] LI Ke,LIU Chang-chun,LI Tong-lei . Medical registration approach using improved maximization of mutual information[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 107 -110 .
[7] JI Tao,GAO Xu/sup>,SUN Tong-jing,XUE Yong-duan/sup>,XU Bing-yin/sup> . Characteristic analysis of fault generated traveling waves in 10 Kv automatic blocking and continuous power transmission lines[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 111 -116 .
[8] . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 27 -32 .
[9] WANG Li-ju,HUANG Qi-cheng,WANG Zhao-xu . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(6): 51 -56 .
[10] SUN Dianzhu, ZHU Changzhi, LI Yanrui. [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 84 -86 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd