JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2017, Vol. 47 ›› Issue (2): 1-7.doi: 10.6040/j.issn.1672-3961.0.2017.073

    Next Articles

TBM tunnel segment dislocation due to large deformation and reinforcement mechanism on surrounding rockmass

CHEN Weizhong1, CHEN Feifei2, ZHAO Wusheng3, ZHANG Yuelin4   

  1. 1. School of Civil Engineering, Shandong University, Jinan 250061, Shandong, China;
    2. Second Highway Consultants Co., Ltd., China Communications Construction Corporation, Wuhan 430056, Hubei, China;
    3. State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, Hubei, China;
    4. China Water Resources Beifang Investigation, Design and Research Co., Ltd, Tianjin 300222, China
  • Received:2017-02-10 Online:2017-04-20 Published:2017-02-10

PDF (PC)

839

Abstract: Soft rock is a complex medium often encountered in rock engineering of major transportation, hydropower, mining engineering construction, squeezing or large deformation is commonly accounted in high in situ stress soft rock underground engineering, which not only affects the construction safety, but also prolongs the construction period and increases the cost. The disaster of large deformation has become a major issue to solve urgently in the field of transportation, water conservancy and deep resources development in China. From the example of Datong River into Huangshui River TBM extrusion segment dislocation caused by the large deformation, repair and control method of large deformation dislocation was suggested from back analysis of field measurement. The results had guiding significance for other expansive mudstone jamming accident and engineering segment dislocation of the turnaround.

Key words: reinforcement, dislocation, soft rock, squeezing deformation, segment

CLC Number: 

  • U455
[1] STEINER W. Tunnelling in squeezing rocks: case histories[J]. Rock Mechanics and Rock Engineering, 1996, 29(4): 211-246.
[2] KELLER F, SCHNEIDER T R. Geologie und geotechnik-geology and geotechnics of the Furka-Base-Tunnel[J]. Schweiz Ing Architekt, 1982, 100(24): 512-520.
[3] LOVERING T S. Geology of the Moffat Tunnel, Colorado[J]. Transactions of the American Institute of Mining, Metallurgical and Petroleum Engineers, Incorporated(AIME), 1928, 76:337-346.
[4] STEINER W. Empirical methods in rock tunneling: review and recommendations[M].[S.l] :[s.n.] , 1979.
[5] EGGER P. Geotechnical problems in deep tunnelling and construction methods[C] // Rock at great depth, ISRM-SPE Int. Symposium, Pau, Balkema, Rotterdam:[s.n.] , 1989: 1191-1198.
[6] KELLER F. Geologie des Zugwald und Vereina tunnels[C] // Zurich: Proceedings of SIA-FGU.[S.l] :[s.n.] , 1993:13-20.
[7] 贾善坡, 陈卫忠, 谭贤君, 等. 山水电站地下厂房区初始地应力场Nelder-Mead优化反演研究[J].岩土力学,2008,29(2):2341-2349. JIA Shanpo, CHEN Weizhong, TAN Xianjun, et al. Nelder-Mead algorithm for inversion analysis of in-situ stress field of underground powerhouse area of Dagangshan Hydropower Station[J]. Rock and Soil Mechanics, 2008, 29(2):2341-2349.
[8] 伍国军, 陈卫忠, 贾善坡. 型地下洞室围岩体蠕变参数位移反分析研究[J]. 岩石力学与工程学报,2010,29(S2):4043-4049. WU Guojun, CHEN Weizhong, JIA Shanpo. Displacement back analysis of creep parameters of engineering rock mass in large-scale underground chambers[J]. Chinese Journal of Rock Mechanics and Engineering, 2010,29(S2):4043-4049.
[1] XU Run, LIU Zhikun, SUN Jianxiu, YU Yang, ZHANG Changyong, LIU Yazhen, YUE Hongya, ZHANG Hongbo. Bearing characteristics of dispersed piles with radial constraints from waste tire grids [J]. Journal of Shandong University(Engineering Science), 2025, 55(6): 142-150.
[2] XIE Yupeng, XIONG Ergang, LI Sifeng, LIU Fengwei, WANG Shang. Plastic hinge length study of prefabricated segmental assembled bridge piers [J]. Journal of Shandong University(Engineering Science), 2025, 55(6): 129-141.
[3] WU Qiulan, SHANG Suya, ZHANG Jiahui, SUN Shouxin, ZHANG Feng, ZHOU Bo, GAO Zheng, SHI Wenchong. Semantic segmentation method for potato common scab images based on multiscale feature fusion [J]. Journal of Shandong University(Engineering Science), 2025, 55(4): 1-8.
[4] GAO Junjian, LIAO Zhuhua, LIU Yizhi, ZHAO Yijiang. Hierarchical multi-agent reinforcement learning based route guidance method combining personalization and signal control [J]. Journal of Shandong University(Engineering Science), 2025, 55(3): 34-45.
[5] ZHENG Yanlei, XU Longwei, ZHANG Hanyu, WANG Guimei, FU Tao. The seismic performance parameter analysis of reinforced concrete square bridge piers strengthened with UHPC [J]. Journal of Shandong University(Engineering Science), 2025, 55(3): 128-140.
[6] Yuxin WANG,Sizhong LÜ,Wang YAO,Chunjin LIN,Ming ZHANG,Zhaofeng LI,Jian ZHANG,Yansheng WANG. Parameter design and effect evaluation of pile side splitting grouting insilty clay stratum [J]. Journal of Shandong University(Engineering Science), 2023, 53(6): 70-81.
[7] Weiqin ZHENG,Jie XU,Jie SUN,Ke WU. Mechanical characteristics of TBM tunnel segment in composite stratum [J]. Journal of Shandong University(Engineering Science), 2022, 52(4): 210-213.
[8] Wenjie LIU,Xueying YANG,Bo ZHANG,Zhixin FAN,Chengxin LI,Huiming YANG,Jinglong LI. Shear capacity of beams with cracks and without web reinforcement [J]. Journal of Shandong University(Engineering Science), 2022, 52(3): 42-50.
[9] Chunhong CAO,Hongxuan DUAN,Ling CAO,Lele ZHANG,Kai HU,Fen XIAO. Real-time semantic segmentation of high-resolution remote sensing image based on multi-level feature cascade [J]. Journal of Shandong University(Engineering Science), 2021, 51(2): 19-25.
[10] Junsan ZHANG,Qiaoqiao CHENG,Yao WAN,Jie ZHU,Shidong ZHANG. MIRGAN: a medical image report generation model based on GAN [J]. Journal of Shandong University(Engineering Science), 2021, 51(2): 9-18.
[11] ZHENG Zijun, FENG Xiang, YU Huiqun, LI Xiuquan. Dynamic prediction of spatiotemporal big data based on relationship transfer and reinforcement learning [J]. Journal of Shandong University(Engineering Science), 2021, 51(2): 105-114.
[12] YU Jun, WENG Xianjie, FAN Wensheng, ZHANG Lianzhen. Analysis of pipe roof grouting reinforcement effect at tunnel entrance in loose stratum [J]. Journal of Shandong University(Engineering Science), 2020, 50(6): 92-100.
[13] XU Zhen, LI Deming, WANG Bin, ZHAN Guyi, ZHANG Shijie. Application of pure steel fiber concrete segment in hard rock tunnel [J]. Journal of Shandong University(Engineering Science), 2020, 50(5): 44-49.
[14] ZHAO Ningning, TANG Xuesong, ZHAO Mingbo. Depth segment classification algorithm based on convolutional neural network [J]. Journal of Shandong University(Engineering Science), 2020, 50(4): 22-27.
[15] Zhifu CHANG,Fengyu ZHOU,Yugang WANG,Dongdong SHEN,Yang ZHAO. A survey of image captioning methods based on deep learning [J]. Journal of Shandong University(Engineering Science), 2019, 49(6): 25-35.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Su-yu,<\sup>,AI Xing<\sup>,ZHAO Jun<\sup>,LI Zuo-li<\sup>,LIU Zeng-wen<\sup> . Milling force prediction model for highspeed end milling 3Cr2Mo steel[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 1 -5 .
[2] LI Kan . Empolder and implement of the embedded weld control system[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 37 -41 .
[3] KONG Xiang-zhen,LIU Yan-jun,WANG Yong,ZHAO Xiu-hua . Compensation and simulation for the deadband of the pneumatic proportional valve[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 99 -102 .
[4] LAI Xiang . The global domain of attraction for a kind of MKdV equations[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 87 -92 .
[5] YU Jia yuan1, TIAN Jin ting1, ZHU Qiang zhong2. Computational intelligence and its application in psychology[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 1 -5 .
[6] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[7] WANG Bo,WANG Ning-sheng . Automatic generation and combinatory optimization of disassembly sequence for mechanical-electric assembly[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 52 -57 .
[8] LI Ke,LIU Chang-chun,LI Tong-lei . Medical registration approach using improved maximization of mutual information[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 107 -110 .
[9] JI Tao,GAO Xu/sup>,SUN Tong-jing,XUE Yong-duan/sup>,XU Bing-yin/sup> . Characteristic analysis of fault generated traveling waves in 10 Kv automatic blocking and continuous power transmission lines[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 111 -116 .
[10] . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 27 -32 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd