您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2009, Vol. 39 ›› Issue (5): 84-86.

• 机器学习与数据挖掘 • 上一篇    下一篇

机器人触须传感器的静态工作机理

谷安,方志军   

  1. 南京航空航天大学机电学院, 江苏 南京 210016
  • 收稿日期:2008-10-16 出版日期:2009-10-16 发布日期:2009-10-16
  • 作者简介:谷安(1970-),男,浙江宁波人,讲师,博士,研究方向为智能控制.E-mail:guan1316@126.com

Static working principle of robot whisker sensors

 GU An, FANG Zhi-Jun   

  1. College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
  • Received:2008-10-16 Online:2009-10-16 Published:2009-10-16

摘要:

触须传感器只能够测量触须根部的位移量,因而建立了柔性触须的力学模型.以触须的偏转角来表征触须的弯曲状态,且推导出触须的偏转角与触须接触点位置的关系方程.利用触须传感器测量出触须根部的位移量,得到物体接触距离的实验曲线.通过与理论曲线的比较,表明触须传感器能够测量触须与物体接触点的位置.由实验数据可知,触须偏转角的大小与接触的距离成反比,且接触的距离越近偏转角变化的速率越快,由此可获得待测物体的位置信息.

关键词: 触须;静态测量;力学模型;偏转角

Abstract:

For the reason that whisker sensors can only measure the displacement of whisker root alone, the mechanical model of the flexible whisker was stablished. The bendingsituation of the whisker was characterized by the magnitude of deflection angle,and an relation equation between deflection ngle and the contact position was deduced. The displacement of the whisker root was measured with the whisker sensors,and an experimental curve of the contact position was obtained. Comparison of the experimental curve with a theoretical curve indicated that the contact position between the robot isker and the measured object can be measured with the whisker sensors. The experimental data showed that the magnitude of deflection anglewas inversely proportional to the contact distance, and the smaller distance was more rapid magnitude as the deflection angle increases, based on which the localization information of a target object was obtained.

Key words: whisker; static measuring; mechanical model; deflection angle

中图分类号: 

  • TP212.9
No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 李 侃 . 嵌入式相贯线焊接控制系统开发与实现[J]. 山东大学学报(工学版), 2008, 38(4): 37 -41 .
[2] 来翔 . 用胞映射方法讨论一类MKdV方程[J]. 山东大学学报(工学版), 2006, 36(1): 87 -92 .
[3] 余嘉元1 , 田金亭1 , 朱强忠2 . 计算智能在心理学中的应用[J]. 山东大学学报(工学版), 2009, 39(1): 1 -5 .
[4] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81 -85 .
[5] 王波,王宁生 . 机电装配体拆卸序列的自动生成及组合优化[J]. 山东大学学报(工学版), 2006, 36(2): 52 -57 .
[6] 张英,郎咏梅,赵玉晓,张鉴达,乔鹏,李善评 . 由EGSB厌氧颗粒污泥培养好氧颗粒污泥的工艺探讨[J]. 山东大学学报(工学版), 2006, 36(4): 56 -59 .
[7] Yue Khing Toh1 , XIAO Wendong2 , XIE Lihua1 . 基于无线传感器网络的分散目标跟踪:实际测试平台的开发应用(英文)[J]. 山东大学学报(工学版), 2009, 39(1): 50 -56 .
[8] 王静,李玉江,张晓瑾, 毕研俊,陈位锁 . 粉煤灰去除水中活性紫KN-B[J]. 山东大学学报(工学版), 2006, 36(6): 100 -103 .
[9] 孙炜伟,王玉振. 考虑饱和的发电机单机无穷大系统有限增益镇定[J]. 山东大学学报(工学版), 2009, 39(1): 69 -76 .
[10] 程代展,李志强. 非线性系统线性化综述(英文)[J]. 山东大学学报(工学版), 2009, 39(2): 26 -36 .