您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2010, Vol. 40 ›› Issue (6): 58-62.

• 机械工程 • 上一篇    下一篇

流量可调调节阀的设计及其特性研究

安延涛,王勇,曹芳,谢玉东   

  1. 山东大学机械工程学院, 山东 济南 250061
  • 收稿日期:2010-05-14 出版日期:2010-12-16 发布日期:2010-05-14
  • 作者简介:安延涛(1982-),男,山东济南人,博士研究生,主要研究方向为流体控制与智能检测.E-mail:anyantao@163.com
  • 基金资助:

    国家高技术研究发展计划(863计划)资助项目(2008AA04Z130)

Design and characteristic research of an adjustable flow control valve

AN Yan-tao, WANG Yong, CAO Fang,  XIE Yu-dong   

  1. School of Mechanical Engineering, Shandong University, Jinan 250061, China
  • Received:2010-05-14 Online:2010-12-16 Published:2010-05-14

摘要:

设计了一种流量可调调节阀,分析了其结构特性和流量特性。流量可调调节阀采用可插式,克服了调节阀流量特性固定的局限性。仿真结果表明,通过选用不同的流量模板,可改变其结构特性,进而改变其流量特性。该调节阀可灵活适用于不同工作要求,有效提高了调节阀的使用效率。

关键词: 调节阀, 流量可调, 结构特性, 流量特性

Abstract:

A kind of adjustable flow control valve was designed and its structural characteristic and flow characteristic were analyzed. The adjustable flow control valve is pluggable and it can overcome the limitation of the fixed flow characteristic.  Simulation results showed that using different flow templates can change its structural characteristics, and then change its flow characteristic. The valve can be flexibly used  for different work requirements and can effectively improve the efficiency of control valve use.

Key words: control valve, adjustable flow, structural characteristic, flow characteristic

[1] 纪合溪,王勇*,谢玉东. 煤气压力调节阀的稳压技术研究[J]. 山东大学学报(工学版), 2011, 41(2): 140-143.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王素玉,艾兴,赵军,李作丽,刘增文 . 高速立铣3Cr2Mo模具钢切削力建模及预测[J]. 山东大学学报(工学版), 2006, 36(1): 1 -5 .
[2] 李 侃 . 嵌入式相贯线焊接控制系统开发与实现[J]. 山东大学学报(工学版), 2008, 38(4): 37 -41 .
[3] 施来顺,万忠义 . 新型甜菜碱型沥青乳化剂的合成与性能测试[J]. 山东大学学报(工学版), 2008, 38(4): 112 -115 .
[4] 孔祥臻,刘延俊,王勇,赵秀华 . 气动比例阀的死区补偿与仿真[J]. 山东大学学报(工学版), 2006, 36(1): 99 -102 .
[5] 来翔 . 用胞映射方法讨论一类MKdV方程[J]. 山东大学学报(工学版), 2006, 36(1): 87 -92 .
[6] 余嘉元1 , 田金亭1 , 朱强忠2 . 计算智能在心理学中的应用[J]. 山东大学学报(工学版), 2009, 39(1): 1 -5 .
[7] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81 -85 .
[8] 王波,王宁生 . 机电装配体拆卸序列的自动生成及组合优化[J]. 山东大学学报(工学版), 2006, 36(2): 52 -57 .
[9] 李可,刘常春,李同磊 . 一种改进的最大互信息医学图像配准算法[J]. 山东大学学报(工学版), 2006, 36(2): 107 -110 .
[10] 季涛,高旭,孙同景,薛永端,徐丙垠 . 铁路10 kV自闭/贯通线路故障行波特征分析[J]. 山东大学学报(工学版), 2006, 36(2): 111 -116 .