JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2012, Vol. 42 ›› Issue (5): 118-122.

• Articles • Previous Articles     Next Articles

Stucture optimization of high power LED heat sinks based on the method of minimum entropy generation

LAI Yan-hua, WEI Lu-lu, Lü Ming-xin, ZHAO Lin-yan, YUE Hong, LIU Cun-fang   

  1. School of Energy and Power Engineering, Shandong University, Jinan 250061,China
  • Received:2012-04-26 Online:2012-10-20 Published:2012-04-26

PDF (PC)

2593

Abstract: In order to enhance the heat transfer of heat sink with straight fins of the high power LED lamps working under natural convection, the structure optimization of this kind of heat sinks was carried out. Based on a method of the minimum entropy generation, the influences of the important parameters on the heat transfer and fluid friction of the heat sink were analyzed, such as the fin thickness and the numbers, the height of fin, total quality of the heat sink and wind speed. The results showed that the dimensionless entropy generation and the temperature entropy generation first increased, and then decreased with the number of fins increasing, and the entropy generation caused by temperature was about ten times of that by friction. In addition, under a given heat flux, there existed the best geometry parameters of heat sink fins, which could minimize the entropy generation, and could improve the whole performance of the heat sinks.

Key words: heat sink, minimum entropy generation, numerical simulation, structure optimization, natural convection

CLC Number: 

  • TK212
[1] LIU Qiming, WANG Wenhui, PAN Yingnan, GAO Yaohui, ZHENG Chengcheng, HE Peng. Influence of thickness defects on the stability of the primary support structure and risk assessment [J]. Journal of Shandong University(Engineering Science), 2025, 55(5): 165-178.
[2] Yuxin WANG,Sizhong LÜ,Wang YAO,Chunjin LIN,Ming ZHANG,Zhaofeng LI,Jian ZHANG,Yansheng WANG. Parameter design and effect evaluation of pile side splitting grouting insilty clay stratum [J]. Journal of Shandong University(Engineering Science), 2023, 53(6): 70-81.
[3] Pengning GUO,Wei LIU,Hao YUAN,Shuo FENG,Yangang WANG. Analysis of screw extrusion dehydration efficiency based on micro element discrete model [J]. Journal of Shandong University(Engineering Science), 2023, 53(1): 114-121.
[4] Yiming ZHANG,Yunpeng LI,Jing LI,Junyu CONG. Development of numerical calculation for coupled multi-field problems in cracked/porous media [J]. Journal of Shandong University(Engineering Science), 2022, 52(6): 63-78.
[5] Weiqin ZHENG,Jie XU,Jie SUN,Ke WU. Mechanical characteristics of TBM tunnel segment in composite stratum [J]. Journal of Shandong University(Engineering Science), 2022, 52(4): 210-213.
[6] TIAN Li,Wenzhe BI,Sarim Saleem SIDDIQUI,Kaiyue LIU. Review on structural resistance to downburst wind loads [J]. Journal of Shandong University(Engineering Science), 2021, 51(5): 32-41.
[7] Ruiyi YAN,Zhen DONG,Sen LU,Yanhua LAI,Mingxin LÜ. Analysis of the influence of the underside baffle and deflector of the fume hood on the flow field [J]. Journal of Shandong University(Engineering Science), 2021, 51(5): 122-130.
[8] LU Guangzhao, ZHOU Bo, XU Feng, SHANGGUAN Wei, WANG Gang, ZHANG Shubo. Stability analysis and construction mechanics of shallow buried bias tunnel openings [J]. Journal of Shandong University(Engineering Science), 2021, 51(4): 61-70.
[9] WANG Chunguo. Optimization of ventilation system of TBM tunnel construction and evaluation of dust suppression effect [J]. Journal of Shandong University(Engineering Science), 2021, 51(3): 52-60.
[10] Chunguo WANG. Study on full face hard rock tunnel boring machine through the overpass in composite stratum [J]. Journal of Shandong University(Engineering Science), 2021, 51(3): 45-51.
[11] SUN Jie, WU Ke, ZHENG Yang, LI Shuchen, YUAN Chao, WANG Xiuwei. Influence of TBM tunnel excavation at different positions on buildings [J]. Journal of Shandong University(Engineering Science), 2021, 51(1): 32-38.
[12] SU Sibo, WANG Guoqing, JIA Xianzhuo, LI Zhicong, HUANG Zhigang. Influence of shear span ratio on seismic performance of hollow pipe pier with slot connection [J]. Journal of Shandong University(Engineering Science), 2021, 51(1): 39-45.
[13] XU Zaigen, LIU Zhengwei, LIU Wenpeng, ZHOU Mengyao, LIU Juncai, TIAN Li. Calculation method of the single-double angle joints in transmission towers [J]. Journal of Shandong University(Engineering Science), 2021, 51(1): 87-93.
[14] CHEN Yucheng, WANG Zhaoyang, GUO Ming, LIN Peng. Influence of concealed karst cave on surrounding rock stability and its treatment technology [J]. Journal of Shandong University(Engineering Science), 2020, 50(5): 33-43.
[15] Jinsheng QI, Hongzhen CAO, Yan SHI, Wenjing DU, Zhan WANG. Optimization of the inner deflector of the shrimp-waist elbow [J]. Journal of Shandong University(Engineering Science), 2020, 50(5): 64-69.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] SHI Lai-shun,WAN Zhong-yi . Synthesis and performance evaluation of a novel betaine-type asphalt emulsifier[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 112 -115 .
[2] WANG Bo,WANG Ning-sheng . Automatic generation and combinatory optimization of disassembly sequence for mechanical-electric assembly[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 52 -57 .
[3] SUN Guohua, WU Yaohua, LI Wei. The effect of excise tax control strategy on the supply chain system performance[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 63 -68 .
[4] WANG Jing,LI Yu-jiang,ZHANG Xiao-jin,BI Yan-jun,CHEN Wei-suo . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(6): 100 -103 .
[5] ZHANG Ai-juan. Synthesis of bone-like hydroxyapatite in simulated body fluid[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2010, 40(3): 86 -90 .
[6] SUN Cong-zheng,GUAN Cong-sheng,QIN Jing-yu,CHENG Chuan . The structure and performances of the electroless Ni-P alloy coating on aluminum alloy[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(5): 108 -112 .
[7] HU Tian-liang,LI Peng,ZHANG Cheng-rui,ZUO Yi . Design of a QEP decode counter based on VHDL[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(3): 10 -13 .
[8] . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 104 -107 .
[9] LI Shan-ping,ZHAO Yu-xiao,QIAO Peng,FENG Zheng-zhi . Cultivation of aerobic granular sludge and the kinetics of substrate degradation and biomass growth[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(3): 95 -98 .
[10] DIAO Yong, TIAN Si-Meng, CAO Zhe-Meng. Geological work method for the construction of the Yichang Wanzhou Railway tunnel in high risk karst areas[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(5): 91 -95 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd