您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2010, Vol. 40 ›› Issue (2): 43-46.

• 控制科学与工程 • 上一篇    下一篇

配送中心分拣订单合批策略的研究

王艳艳,吴耀华,孙国华,于洪鹏   

  1. 山东大学控制科学与工程学院,山东 济南 250061
  • 收稿日期:2009-08-13 出版日期:2010-04-16 发布日期:2009-08-13
  • 作者简介:王艳艳(1978-),女,山东淄博人,讲师,博士研究生,主要研究方向为仓储、分拣、物流工程.E-mail: 1978-wyy@163.com
  • 基金资助:

    国家自然科学基金资助项目(50175064)

Research on  picking  order  batching  policy  of  a  distribution  center

WANG Yan-yan, WU Yao-hua, SUN Guo-hua, YU Hong-peng   

  1. School of Control Science and Engineering, Shandong University, Jinan 250061, China
  • Received:2009-08-13 Online:2010-04-16 Published:2009-08-13

关键词: 配送中心;拣选批量, 订单合批;先到先服务;改进小生境遗传算法

Abstract:

This is an effective way to reduce the picking cost in a laborintensive distribution center by optimizing the picking route and order batching. By analyzing the characteristics of manual-picking-working and order batching, a new mathematical  model was constructed, taking into consideration of the picking route, picking number and the lead time of the order. Furthermore, the model was solved based on different algorithms including firstcomefirstserve, genetic algorithm, and  improved niche genetic algorithm, and thus to decide the best algorithm with best operation time and optimized effect depending on different order data.

Key words: distribution center, picking batching, order batching, first-come-first-serve, improved niche genetic algorithm

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 张永花,王安玲,刘福平 . 低频非均匀电磁波在导电界面的反射相角[J]. 山东大学学报(工学版), 2006, 36(2): 22 -25 .
[2] 孔祥臻,刘延俊,王勇,赵秀华 . 气动比例阀的死区补偿与仿真[J]. 山东大学学报(工学版), 2006, 36(1): 99 -102 .
[3] 来翔 . 用胞映射方法讨论一类MKdV方程[J]. 山东大学学报(工学版), 2006, 36(1): 87 -92 .
[4] 余嘉元1 , 田金亭1 , 朱强忠2 . 计算智能在心理学中的应用[J]. 山东大学学报(工学版), 2009, 39(1): 1 -5 .
[5] 季涛,高旭,孙同景,薛永端,徐丙垠 . 铁路10 kV自闭/贯通线路故障行波特征分析[J]. 山东大学学报(工学版), 2006, 36(2): 111 -116 .
[6] 秦通,孙丰荣*,王丽梅,王庆浩,李新彩. 基于极大圆盘引导的形状插值实现三维表面重建[J]. 山东大学学报(工学版), 2010, 40(3): 1 -5 .
[7] 王丽君,黄奇成,王兆旭 . 敏感性问题中的均方误差与模型比较[J]. 山东大学学报(工学版), 2006, 36(6): 51 -56 .
[8] 孙殿柱,朱昌志,李延瑞 . 散乱点云边界特征快速提取算法[J]. 山东大学学报(工学版), 2009, 39(1): 84 -86 .
[9] 刘新1 ,宋思利1 ,王新洪2 . 石墨配比对钨极氩弧熔敷层TiC增强相含量及分布形态的影响[J]. 山东大学学报(工学版), 2009, 39(2): 98 -100 .
[10] 胡天亮,李鹏,张承瑞,左毅 . 基于VHDL的正交编码脉冲电路解码计数器设计[J]. 山东大学学报(工学版), 2008, 38(3): 10 -13 .