您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2009, Vol. 39 ›› Issue (6): 68-71.

• 控制科学与工程 • 上一篇    下一篇

基于康普顿散射的物体厚度测量方法

左凯 孙同景 李振华   

  1. 山东大学控制科学与工程学院, 山东 济南 250061
  • 收稿日期:2009-03-31 出版日期:2009-12-16 发布日期:2009-12-16
  • 作者简介:左凯(1972-),男,山东泰安人,博士研究生,研究方向为工业CT的图像处理研究. E-mail: zuokai@tom.com

Compton scattering based method of objects thickness

  1. School of Control Science and Engineering, Shandong University, Jinan 250061, China
  • Received:2009-03-31 Online:2009-12-16 Published:2009-12-16

关键词: X射线;康普顿散射;测量;厚度

Abstract:

A new objects thickness measurement methodwas proposed for the fact that the attenuation coefficient could not be deriveddirectly in the detection process. Applying the X-ray attenuation principle in industrial CT and the Compton scattering effect appearing inside high-energy photons of theobjects, a functional relationship between the object density and the attenuation coefficient was built and, based on this, the accurate thickness of objects can be calculated rapidly. A simulation was given to show the effectiveness of the proposed method.

Key words: X-ray; Compton scattering; measurement; thickness

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81 -85 .
[2] 秦通,孙丰荣*,王丽梅,王庆浩,李新彩. 基于极大圆盘引导的形状插值实现三维表面重建[J]. 山东大学学报(工学版), 2010, 40(3): 1 -5 .
[3] 张爱娟. 模拟体液中类骨羟基磷灰石的合成[J]. 山东大学学报(工学版), 2010, 40(3): 86 -90 .
[4] 孙从征,管从胜,秦敬玉,程川 . 铝合金化学镀镍磷合金结构和性能[J]. 山东大学学报(工学版), 2007, 37(5): 108 -112 .
[5] 刘新1 ,宋思利1 ,王新洪2 . 石墨配比对钨极氩弧熔敷层TiC增强相含量及分布形态的影响[J]. 山东大学学报(工学版), 2009, 39(2): 98 -100 .
[6] 潘多涛,刘桂萍,刘长风 . 生物絮凝剂产生菌的筛选及培养条件优化[J]. 山东大学学报(工学版), 2008, 38(3): 99 -103 .
[7] 任敬喜,耿金花,高齐圣 . 多因素多指标产品的质量优化[J]. 山东大学学报(工学版), 2007, 37(3): 114 -117 .
[8] 世文学 刘卫东 孙永福. 基于DEM的堰塞湖1/3溃决模拟及人员撤离方案研究[J]. 山东大学学报(工学版), 2009, 39(5): 144 -148 .
[9] 陈朋 胡文容 裴海燕. 一株反硝化细菌LZ-14的筛选及其脱氮特性[J]. 山东大学学报(工学版), 2009, 39(5): 133 -138 .
[10] 张道强. 知识保持的嵌入方法[J]. 山东大学学报(工学版), 2010, 40(2): 1 -10 .