您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (4): 37-42.doi: 10.6040/j.issn.1672-3961.0.2017.101

• • 上一篇    下一篇

一种应用于直流配电网的隔离直流变换器软启动方法

潘羿威,袁帅,陈阿莲,张承慧*   

  1. 山东大学控制科学与工程学院, 山东 济南 250061
  • 收稿日期:2017-01-03 出版日期:2017-08-20 发布日期:2017-01-03
  • 通讯作者: 张承慧(1963— ),男,山东德州人,教授,博士,主要研究方向为电动汽车,新能源和优化控制. E-mail:zchui@sdu.edu.cn E-mail:cinsdllpyv@163.com
  • 作者简介:潘羿威(1993— ),男,山东德州人,硕士研究生,主要研究方向为微电网能量管理. E-mail:cinsdllpyv@163.com
  • 基金资助:
    国家自然科学基金资助项目(51377101);教育部新世纪人才支持计划资助项目(NCET-13-0339)

A soft starting method for the isolated DC/DC converter in DC distribution systems

PAN Yiwei, YUAN Shuai, CHEN Alian, ZHANG Chenghui*   

  1. School of Control Science and Engineering, Shandong University, Jinan 250061, Shandong, China
  • Received:2017-01-03 Online:2017-08-20 Published:2017-01-03

摘要: 针对广泛应用于直流配电网的双有源桥的启动电流冲击问题,提出一种简单的直流变换器软启动方法。在设定的启动时间内,输入侧H桥输出方波电压占空比从0逐渐增加到0.5,同时通过移相控制调节输出侧电压在相同的时间内从0逐渐增加到给定值。通过这两种方法的协同控制,可以有效抑制启动时电流冲击和直流电压振荡,系统具备很好的抗扰能力且不需要采用传统软启动的复杂模式切换。分析和仿真验证了软启动方法的有效性。

关键词: 移相控制, 软启动, 直流变换器, 直流配网

Abstract: To solve over current problem of the isolated DC/DC converter that commonly applied in DC distribution systems, a novel simple soft starting method was proposed. During the starting time, the dutycycle of the input side square wave voltage gradually changed from 0 to 0.5, while the DC voltage ramped from 0 to the final set value at the same time by phase shift control. By applying these two methods, current overshooting and capacitor voltage oscillation could be effectively suppressed. The system had a strong anti-disturbance capacity and do not require complex mode switching procedure as conventional soft starting method. Simulation results were provided to validate the effectiveness of the proposed soft starting method.

Key words: DC/DC converter, DC distribution system, soft start, phase shift control

中图分类号: 

  • TM46
[1] 江道灼,郑欢.直流配电网研究现状与展望[J].电力系统自动化,2012,36(8):98-104. JIANG Daozhuo, ZHENG Huan. Research status and developing prospect of DC distribution network[J]. Automation of Electric Power Systems, 2012, 36(8): 98-104.
[2] 宋强,赵彪,刘文华,等.智能直流配电网研究综述[J].中国电机工程学报,2013,33(25):9-20. SONG Qiang, ZHAO Biao, LIU Wenhua, et al. An overview of research on smart DC distribution power network[J]. Proceedings of the CSEE, 2013, 33(25): 9-20.
[3] CARRIZOSA M J, BENCHAIB A, ALOU P, et al. DC transformer for DC/DC connection in HVDC network[C] //Proceedings of the 2013 15th European Conference on Power Electronics and Applications(EPE). Lille, France: IEEE Press, 2013: 1-10.
[4] HE J, LI Y W, MUNIR M S. A flexible harmonic control approach through voltage-controlled DG-grid interfacing converters[J]. IEEE Transactions on Industrial Electronics, 2012, 59(1): 444-455.
[5] HE J, LI Y W, XU D, et al. Deadbeat weighted average current control with corrective feed-forward compensation for microgrid converters with nonstandard LCL filter[J]. IEEE Transactions on Power Electronics, 2017, 32(4): 2661-2674.
[6] 李建国,赵彪,宋强,等.适用于中压直流配网的多电平直流链固态变压器[J].中国电机工程学报,2016,36(14):3717-3725. LI Jianguo, ZHAO Biao, SONG Qiang, et al. DC solid state transformer based on multilevel DC link for medium-voltage DC distribution application[J]. Proceedings of the CSEE, 2016, 36(14): 3717-3725.
[7] 李永庆,孟伟.电动汽车预充电过程研究[J].汽车电器, 2013(5):8-10. LI Yongqing, MENG Wei. On the precharging process for EV[J]. Design Research, 2013(5): 8-10.
[8] 姜雪松.隔离升压全桥 DC-DC 变换器拓扑理论和控制技术研究[D].北京:中国科学院电工研究所,2006. JIANG Xuesong. Research on the topology theory and control technology of isolated boost full bridge DC-DC converter[D]. Beijing: Institute of Electrical Engineering of the Chinese Academy of Sciences, 2006.
[9] 曲平,李子欣,宋鹏先,等.隔离式双向全桥DC-DC变换器预充电研究[J].电工技术学报,2014,29(1):320-325. QU Ping, LI Zixin, SONG Pengxian, et al. Pre-charge strategy study for isolated dual active bridge DC-DC converter[J]. Transactions of China Electrotechnical Society, 2014, 29(1):320-325.
[10] GIULIANI F, DELMONTE N, COVA P, et al. Soft-starting procedure for dual active bridge converter[C] //2015 IEEE 16th Workshop on Control and Modeling for Power Electronics(COMPEL). Vancouver, BC, Canada: IEEE Press, 2015: 1-6.
[11] DE DONCKER R W A A, DIVAN D M, KHERAL-UWALA M H. A three-phase soft-switched high-power-density DC/DC converter for high-power applications[J]. IEEE Transactions on Industry Applications, 1991, 27(1): 63-73.
[12] NAKATA S, MAKINO H, HOSOKAWA J. Energy efficient stepwise charging of a capacitor using a DC-DC converter with consecutive changes of its duty[J]. IEEE Transactions on Circuits and Systems, 2014, 61(7): 2194-2203.
[1] 李翔宇,赵志诚,王文逾. 基于反向解耦的PWM整流器分数阶内模控制[J]. 山东大学学报(工学版), 2018, 48(4): 109-115.
[2] 龚宇雷1,2,谭兴国2,李庆民2,王辉2,孙勇3. 用于电流输出型电压源逆变器的三相四线桥保护拓扑及参数选择方法[J]. 山东大学学报(工学版), 2011, 41(6): 128-135.
[3] 姜吉顺,张厚升,陈文钢 . 新型单周控制的单相功率因数校正器[J]. 山东大学学报(工学版), 2007, 37(2): 67-71 .
[4] 张锋,杨桂兴,岳晨晶,郝全睿,李东. 考虑内部动态约束的MMC功率运行区间的确定及控制方法[J]. 山东大学学报 (工学版), 2020, 50(4): 98-107.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王素玉,艾兴,赵军,李作丽,刘增文 . 高速立铣3Cr2Mo模具钢切削力建模及预测[J]. 山东大学学报(工学版), 2006, 36(1): 1 -5 .
[2] 李 侃 . 嵌入式相贯线焊接控制系统开发与实现[J]. 山东大学学报(工学版), 2008, 38(4): 37 -41 .
[3] 孔祥臻,刘延俊,王勇,赵秀华 . 气动比例阀的死区补偿与仿真[J]. 山东大学学报(工学版), 2006, 36(1): 99 -102 .
[4] 来翔 . 用胞映射方法讨论一类MKdV方程[J]. 山东大学学报(工学版), 2006, 36(1): 87 -92 .
[5] 余嘉元1 , 田金亭1 , 朱强忠2 . 计算智能在心理学中的应用[J]. 山东大学学报(工学版), 2009, 39(1): 1 -5 .
[6] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81 -85 .
[7] 王波,王宁生 . 机电装配体拆卸序列的自动生成及组合优化[J]. 山东大学学报(工学版), 2006, 36(2): 52 -57 .
[8] 李可,刘常春,李同磊 . 一种改进的最大互信息医学图像配准算法[J]. 山东大学学报(工学版), 2006, 36(2): 107 -110 .
[9] 季涛,高旭,孙同景,薛永端,徐丙垠 . 铁路10 kV自闭/贯通线路故障行波特征分析[J]. 山东大学学报(工学版), 2006, 36(2): 111 -116 .
[10] 浦剑1 ,张军平1 ,黄华2 . 超分辨率算法研究综述[J]. 山东大学学报(工学版), 2009, 39(1): 27 -32 .