您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2011, Vol. 41 ›› Issue (2): 158-162.

• 其它 • 上一篇    下一篇

螺旋槽管内流动换热场协同分析

唐玉峰,田茂诚,冷学礼   

  1. 山东大学能源与动力工程学院, 山东 济南 250061
  • 收稿日期:2010-06-24 出版日期:2011-04-16 发布日期:2010-06-24
  • 作者简介:唐玉峰(1982- ),男,山东德州人,博士研究生,主要研究方向为强化传热及节能技术. E-mail:tyf-sdu@foxmail.com
  • 基金资助:

    国家重点基础研究发展规划项目计划(973计划)资助项目(2007CB206903); 山东省科技攻关项目经费资助项目(2007GG30007001);山东大学自主创新基金资助项目

Field synergy analyses on inner flow and heat transfer
characteristics of spirally corrugated tubes

TANG Yu-feng, TIAN Mao-cheng, LENG Xue-li   

  1. School of Energy & Power Engineering, Shandong University, Jinan 250061, China
  • Received:2010-06-24 Online:2011-04-16 Published:2010-06-24

摘要:

运用数值模拟结合场协同原理,对螺旋槽管内充分发展湍流的流动和换热进行了分析。模拟以空气为工质,管壁温度恒定,分别选取了4种不同的螺纹节距和螺纹高度组成的16组结构参数。讨论了螺纹凸起,以及螺纹节距、螺纹高度变化对螺旋槽管场协同性能和强化传热能力的影响。结果表明:利用场协同原理,可以解释结构参数的变化对螺旋槽管传热效果的影响,并能够对强化传热元件的结构优化提供指导。通过对比,模拟所得Nu数与实验所得Nu数关联公式的计算结果基本一致。

关键词: 螺旋槽管, 强化传热, 场协同理论

Abstract:

A numerical study combined with the field synergy principle was performed to investigate the flow and heat transfer of fully developed turbulent flow in a spirally corrugated tube. Air was selected as the working fluid and constant temperature was applied to the tube wall. Sixteen different structural parameters consisting  of four different corrugation pitches and depths were considered. The effects of helical corrugation and changes of corrugation pitch and depth on field synergy performance and heat transfer enhancement of the enhanced tube were discussed. It indicates that the field synergy principle is efficient in explaining the effect of structural parameter changes on the heat transfer performance of spirally corrugated tubes and also is a guide to structural optimization of enhanced heat transfer elements. By contrast, the Nusselt number acquired from the numerical calculation is in relatively good agreement with the results of experimental correlation.

Key words:  spirally corrugated tubes, heat transfer enhancement, field synergy principle

[1] 杜文静,赵浚哲,张立新,王湛,季万祥. 换热器结构发展综述及展望[J]. 山东大学学报 (工学版), 2021, 51(5): 76-83.
[2] 张涛, 韩吉田, 闫素英, 于泽庭, 周然. 太阳能真空管的热性能分析与测试[J]. 山东大学学报(工学版), 2014, 44(4): 76-83.
[3] 程屾, 孙奉仲*. 渗层不锈钢管束表面真空下换热特性的实验分析[J]. 山东大学学报(工学版), 2014, 44(1): 90-94.
[4] 车翠翠,田茂诚*,冷学礼. 翼片诱导纵向涡强化层流对流传热数值模拟[J]. 山东大学学报(工学版), 2013, 43(5): 104-110.
[5] 姜波1,田茂诚2*,郝卫东1, 刘福国1. 新型弹性管束固有振动特性实验及数值模拟[J]. 山东大学学报(工学版), 2012, 42(4): 132-136.
[6] 田茂诚1, 姜波2,冷学礼1,程林1. 流体诱导新型弹性管束强化传热实验[J]. 山东大学学报(工学版), 2011, 41(5): 21-25.
[7] 崔永章1,2,田茂诚1,李广鹏2. 内置折边扭带圆管内三维流动与传热数值模拟[J]. 山东大学学报(工学版), 2010, 40(2): 143-148.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 张永花,王安玲,刘福平 . 低频非均匀电磁波在导电界面的反射相角[J]. 山东大学学报(工学版), 2006, 36(2): 22 -25 .
[2] 李 侃 . 嵌入式相贯线焊接控制系统开发与实现[J]. 山东大学学报(工学版), 2008, 38(4): 37 -41 .
[3] 孔祥臻,刘延俊,王勇,赵秀华 . 气动比例阀的死区补偿与仿真[J]. 山东大学学报(工学版), 2006, 36(1): 99 -102 .
[4] 来翔 . 用胞映射方法讨论一类MKdV方程[J]. 山东大学学报(工学版), 2006, 36(1): 87 -92 .
[5] 余嘉元1 , 田金亭1 , 朱强忠2 . 计算智能在心理学中的应用[J]. 山东大学学报(工学版), 2009, 39(1): 1 -5 .
[6] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81 -85 .
[7] 王波,王宁生 . 机电装配体拆卸序列的自动生成及组合优化[J]. 山东大学学报(工学版), 2006, 36(2): 52 -57 .
[8] 李可,刘常春,李同磊 . 一种改进的最大互信息医学图像配准算法[J]. 山东大学学报(工学版), 2006, 36(2): 107 -110 .
[9] 季涛,高旭,孙同景,薛永端,徐丙垠 . 铁路10 kV自闭/贯通线路故障行波特征分析[J]. 山东大学学报(工学版), 2006, 36(2): 111 -116 .
[10] 浦剑1 ,张军平1 ,黄华2 . 超分辨率算法研究综述[J]. 山东大学学报(工学版), 2009, 39(1): 27 -32 .