您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版)

• 论文 • 上一篇    下一篇

一种改进的最大互信息医学图像配准算法

李可, 刘常春, 李同磊   

  1. 山东大学控制科学与工程学院,山东济南250061
  • 收稿日期:2005-10-12 修回日期:1900-01-01 出版日期:2006-04-24 发布日期:2006-04-24
  • 通讯作者: 李可

Medical registration approach using improved maximization of mutual information

LI Ke,LIU Chang-chun,LI Tong-lei   

  1. School of Control Science and Engineering,Shandong University,Jinan 250061,China
  • Received:2005-10-12 Revised:1900-01-01 Online:2006-04-24 Published:2006-04-24
  • Contact: LI Ke

摘要: 给出了一种基于最大互信息和边缘互方差的医学图像配准算法. 这种算法是在计算原始图像互信息之后, 引入参考图像和浮动图像的边缘互方差值,从而建立起一个新的测度函数来指导寻优过程,最终实现图像配准. 与传统的最大互信息配准算法相比,避免了单纯依赖图像联合直方图所造成的不稳定性,使配准能更加符合图像的特点. 实验证明,这种改进算法有以下优点:配准参数曲线峰值尖锐,易于选择出最优值;在图像灰度缺失的情况下配准有较高的准确性;在噪声方差增大的情况下配准有较强的鲁棒性.

关键词: 互信息, 边缘互方差, 医学图像配准

Abstract: Gives a new algorithm of medical image registration based on maximum of mutual information (MMI) and edge correlative deviation. This algorithm combines the edge correlative deviation of the reference image and floating image with the mutual information values of original images, and builds a new function to guide the searching course and thereby to realize the registration. Comparing to the standard MMI, this new algorithm accords with the individuality of images, by avoiding the instability brought by the mutual histogram but considering the information of the voxels' intensity values. Tests have proven that this new method additionally has several improved attributes in aspects of the more obvious climaxes of parameters' curves, more diminished errors on extremes conditions that images lack intensity values, better robust when resisting aggravated white noise.

Key words: edge correlation deviation, medical image registration , : mutual information

中图分类号: 

  • TP391.4
[1] 赵鹏程, 张福全, 杨绪兵, 吴寅. 基于可视化的森林火灾监测节点优化部署策略[J]. 山东大学学报 (工学版), 2019, 49(1): 30-35.
[2] 林耀进,张佳,林梦雷,王娟. 一种基于模糊信息熵的协同过滤推荐方法[J]. 山东大学学报(工学版), 2016, 46(5): 13-20.
[3] 潘盼1,王熙照2,翟俊海2. 基于有序决策树的改进归纳算法[J]. 山东大学学报(工学版), 2014, 44(1): 41-44.
[4] 张小峰,张志旺,逄珊. 基于通信系统的决策树构造算法[J]. 山东大学学报(工学版), 2011, 41(4): 79-84.
[5] 王法波,许信顺. 文本分类中一种新的特征选择方法[J]. 山东大学学报(工学版), 2010, 40(4): 8-11.
[6] 翟海亭,吴晓娟,彭彰 . 一种改进的基于互信息的三维医学图像配准算法[J]. 山东大学学报(工学版), 2006, 36(4): 33-39 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王素玉,艾兴,赵军,李作丽,刘增文 . 高速立铣3Cr2Mo模具钢切削力建模及预测[J]. 山东大学学报(工学版), 2006, 36(1): 1 -5 .
[2] 李 侃 . 嵌入式相贯线焊接控制系统开发与实现[J]. 山东大学学报(工学版), 2008, 38(4): 37 -41 .
[3] 孔祥臻,刘延俊,王勇,赵秀华 . 气动比例阀的死区补偿与仿真[J]. 山东大学学报(工学版), 2006, 36(1): 99 -102 .
[4] 余嘉元1 , 田金亭1 , 朱强忠2 . 计算智能在心理学中的应用[J]. 山东大学学报(工学版), 2009, 39(1): 1 -5 .
[5] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81 -85 .
[6] 季涛,高旭,孙同景,薛永端,徐丙垠 . 铁路10 kV自闭/贯通线路故障行波特征分析[J]. 山东大学学报(工学版), 2006, 36(2): 111 -116 .
[7] 浦剑1 ,张军平1 ,黄华2 . 超分辨率算法研究综述[J]. 山东大学学报(工学版), 2009, 39(1): 27 -32 .
[8] 秦通,孙丰荣*,王丽梅,王庆浩,李新彩. 基于极大圆盘引导的形状插值实现三维表面重建[J]. 山东大学学报(工学版), 2010, 40(3): 1 -5 .
[9] 刘文亮,朱维红,陈涤,张泓泉. 基于雷达图像的运动目标形态检测及跟踪技术[J]. 山东大学学报(工学版), 2010, 40(3): 31 -36 .
[10] 王丽君,黄奇成,王兆旭 . 敏感性问题中的均方误差与模型比较[J]. 山东大学学报(工学版), 2006, 36(6): 51 -56 .