您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (5): 95-101.doi: 10.6040/j.issn.1672-3961.0.2015.420

• • 上一篇    下一篇

预应力悬锚式挡土墙受力特性

张宏博1,2,解全一1,2,岳红亚1,2*,崔琦3,孙润生1,2,王珂1,2   

  1. 1. 山东大学土建与水利学院, 山东 济南 250061;2.山东省路基安全工程技术研究中心, 山东 济南 250061;3.山东高阳建设有限公司, 山东 淄博 255000
  • 收稿日期:2015-12-21 出版日期:2016-10-20 发布日期:2015-12-21
  • 通讯作者: 岳红亚(1990— ),男,山东济宁人,硕士研究生,主要研究方向为挡土墙支护理论. E-mail: 759629600@qq.com E-mail:zhanghongbo@sdu.edu.cn
  • 作者简介:张宏博(1977— ),男,山东金乡人,副教授,博士,主要研究方向为挡土墙支护理论与地基处理.E-mail:zhanghongbo@sdu.edu.cn
  • 基金资助:
    国家自然科学基金资助项目(51208284,41372300);山东省科技发展计划资助项目(2013GSF11603)

Mechanical performance of prestressed anchor plate retaining wall

ZHANG Hongbo1,2, XIE Quanyi1,2, YUE Hongya1,2*, CUI Qi3, SUN Runsheng1,2, WANG Ke1,2   

  1. 1.School of Civil Engineering, Shandong University, Jinan 250061, Shandong, China;
    2.Shandong Engineering &
    Technology Research Center for Subgrade Safety, Jinan 250061, Shandong, China;
    3.Shandong Gaoyang Construction Company Limited, Zibo 255000, Shandong, China
  • Received:2015-12-21 Online:2016-10-20 Published:2015-12-21

摘要: 为了研究不同侧向预应力水平及竖向荷载对预应力悬锚式挡土墙墙背土压力、锚定板板前土压力、墙身剪应力分布特性的影响规律,设计了室内模型试验及数值模型并对悬锚式挡土墙受力特性进行测试与计算分析。研究结果表明:侧向预应力作用下,挡土墙墙背土压力呈抛物线分布并在锚杆处呈现峰值,锚定板板前土压力沿板宽度方向呈“马鞍型”分布并以约35°角向两侧扩展,锚定板板前土压力沿锚索轴向的压缩影响范围约2倍板宽;竖向荷载作用下,挡土墙侧向土压力呈“S”形分布,靠近挡墙底板位置处墙体剪应力急剧增大,应加强该类挡土墙根部配筋设计。结论可为预应力悬锚式挡土墙在公路建设中的推广和应用提供借鉴。

关键词: 预应力, 土压力分布, 墙体剪应力, 悬锚式挡土墙, 锚定板, 上部荷载

Abstract: In order to study the influence of lateral prestressed force and upload on the distribution of earth pressure on the anchor-plate retaining wall and anchor plate and shear stress of wall, a serial of retaining wall model tests and numerical simulation were put forth. The influence law of the different loads to the mechanical features of anchor-plate retaining wall was found. Results showed that, under prestressed force action, the distribution curve of lateral soil pressure of retaining wall was like a parabolic with the peak value around anchored bar. Earth pressure before anchor plate was a saddle distribution along the width of plate with the expanding degree, 35°. In addition, along the axis of prestressed cable, the influence area of earth pressure of anchor plate was about double width of anchor plate. Under upload action, the distribution curve of lateral earth pressure of retaining wall was like an alphabet S curve. There was a big shear stress area near the rooting of retaining wall, where should be strengthened by increasing ratio of reinforcement. Conclusion of this study could provide reference for the population and application of prestressed anchor plate retaining wall in highway engineering.

Key words: anchor plate retaining wall, structure shear stress, upload, anchor plate, earth pressure distribution, prestressed force

中图分类号: 

  • U417.11
[1] 王志谦.悬锚式挡土墙结构的研究[D].西安:长安大学, 2000. WANG Zhiqian.The research of suspension anchor retaining wall [D]. Xi'an: Chang'an University, 2000.
[2] 杜松. 路基悬锚式挡土墙设计与稳定性分析[D].西安:长安大学, 2011. DU Song. The design and stability analysis of subgrade cantilever-anchor retaining[D]. Xi'an:Chang'an University, 2011.
[3] 卢肇钧,吴肖茗,张肇伸.锚定板挡土结构的研究[J].土木工程学报, 1980(1):66-76. LU Zhaojun, WU Xiaoming, ZHANG Zhaoshen.Anchor slab structure retains earth-fill[J]. China Civil Engineering Journal, 1980(1):66-76.
[4] 卢肇钧,吴肖茗,张肇.伸锚定板挡土结构[J].岩土工程学报, 1981, 3(3):34-40. LU Zhaojun, WU Xiaoming, ZHANG Zhaoshen.Anchor slab structure earthfill[J]. Chinese Journal of Geotechnical Engineering, 1981, 3(3):34-40.
[5] 李长林.季节冻土区水工锚定板挡土墙的冻胀荷载[J].水利学报, 1991(9):55-57. LI Changlin. Hydraulic anchor plate retaining wall of frost heavy load in the seasonally frozen region[J].Journal of Hydraulic Engineering, 1991(9):55-57.
[6] 薛志超,宋修广,陈宝强,等.压力分散型挡土墙支护高填土路基施工过程的受力特征[J].公路交通科技, 2013, 30(4):11-16. XUE Zhichao, SONG Xiuguang, CHEN Baoqiang, et al. Stress characteristics of pressure dispersive retaining wall for supporting high-filling embankment during construction[J].Journal of Highway and Transportation Research and Development, 2013, 30(4):11-16.
[7] 陈忠达,王东升.悬锚式挡土墙有限元分析[J].公路交通科技, 2005, 2(1):38-41. CHEN Zhongda, WANG Dongsheng.The finite element analysis of suspended-anchor earth retaining wall[J].Journal of Highway and Transportation Research and Development, 2005, 2(1):38-41.
[8] 陈忠达,王东升,高江平,等.悬锚式挡土墙结构设计与分析[J].长安大学学报(自然科学版), 2005, 25(6):1-5. CHEN Zhongda, WANG Dongsheng, GAO Jiangping, et al.Structural design and calculation of suspended anchor earth retaining wall[J].Journal of Chang'an University(Natural Science Edition), 2005, 25(6):1-5.
[9] 杨佑发,黄小鹏.锚定板挡土墙计算机辅助设计系统的研究[J].土工基础, 2006, 20(4):64-67. YANG Youfa, HUANG Xiaopeng.Computer assistant design system for anchor plate retaining wall[J]. Soil Engineering and Foundation, 2006, 20(4):64-67.
[10] ADNAN A B. Safety and reliability of anchored bulkhead walls[J]. Structural Safety, 1991, 10(4):283-295.
[11] BOUCKOVALAS G. Liquefaction analysis of a model anchored bulkhead in centrifuge[J]. Soil Dynamics and Earthquake Engineering, 1995, 14(5):347-360.
[12] BILGIN O. Numerical studies of anchored sheet pile wall behavior constructed in cut and fill conditions[J]. Computers and Geotechnics, 2010, 37(3):399-407.
[13] SAWWAF M. The effect of soil reinforcement on pullout resistance of an existing vertical anchor plate in sand[J]. Computers and Geotechnics, 2006, 33(3):167-176.
[14] SCHROEDER W L. Anchored bulkheads with sloping dredge lines[J].International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1983, 109(6):845-851.
[15] 吴忠诚, 汤连生,廖志强,等.深基坑复合土钉墙支护FLAC-3D模拟及大型现场原位测试研究[J].岩土工程学报,2006, 28(S1):1460-1465. WU Zhongcheng, TANG Liansheng, LIAO Zhiqiang, et al. FlAC-3D simulation of deep excavation with compound soil nailing support[J].Chinese Journal of Geotechnical Engineering, 2006, 28(S1):1460-1465.
[16] 朱合华,郑国平,刘庭金.预应力锚固支护的数值模拟[J].西部探矿工程,2003(6):17-19. ZHU Hehua, ZHENG Guoping, LIU Tingjin.Numerical simulating of pre-stressed anchored structure[J].West-China Exploration Engineering, 2003(6):17-19.
[17] 夏元友,范卫琴,芮瑞,等.压力分散型锚索作用效果的数值模拟分析[J].岩土力学, 2008, 29(11):3144-3148. XIA Yuanyou, FAN Weiqin, RUI Rui, et al.Numerical simulation analysis of pressure diffusion anchor cables effect mechanism[J].Rock and Soil Mechanics, 2008, 29(11):3144-3148.
[18] 朱合华,郑国平,刘庭金.预应力锚固支护的数值模拟[J].西部探矿工程,2003(6):17-19. ZHU Hehua, ZHENG Guoping, LIU Tingjin.Numerical simulation of prestressed anchored structure[J]. West-China Exploration Engineering, 2003(6):17-19.
[19] 童飞.基于BP神经网络的水上交通事故预测及MATLAB实现[D]. 武汉:武汉理工大学, 2005. TONG Fei. A maritime accident forecast based on BP neural network and carried out by MATLAB[D].Wuhan: Wuhan University of Technology, 2005.
[20] 杨书申, 邵龙义.MATLAB环境下图像分形维数的计算[J].中国矿业大学学报, 2006, 35(4):478-482. YANG Shushen, SHAO Longyi.Estimation of fractal dimensions of images based on MATLAB[J].Journal of China University of Mining Technology, 2006, 35(4):478-482.
[21] 梁原.基于MATLAB的数字图像处理系统研究[D].长春:长春理工大学, 2008. LIANG Yuan.The research of digital image processing based on MATLAB[D].Changchun:Changchun University of Science and Technology, 2008.
[22] 唐家德.基于MATLAB的非线性曲线拟合[J].计算机与现代化, 2008(6):15-19. TANG Jiade.Nonlinear curve fitting based on MATLAB[J]. Computer and Modernization, 2008(6):15-19.
[23] 桂劲松,康海贵.结构可靠度分析的响应面法及其MATLAB实现[J].计算力学学报, 2004, 21(6):683-687. GUI Jinsong, KANG Haigui.Response surface method for structural reliability analysis and its realization with Matlab[J].Chinese Journal of Computational Mechanics, 2004, 21(6):683-687.
[24] BALLABIO D. A MATLAB toolbox for principal component analysis and unsupervised exploration of data structure[J]. Chemometrics and Intelligent Laboratory Systems, 2015, 149(15):1-9.
[25] 杨书申,邵龙义.MATLAB环境下图像分形维数的计算[J].中国矿业大学学报,2006, 35(4):478-481. YANG Shushen, SHAO Longyi.Estimation of fractal dimensions of images based on MATLAB[J].Journal of China University of Mining Technology, 2006, 35(4):478-481.
[1] 郝艳广,徐建升,明道贵,雷霆,邱明喜,陈迪杨. 锚杆加固作用下椭圆形深埋隧洞承载力分析[J]. 山东大学学报 (工学版), 2024, 54(1): 131-140.
[2] 江健宏,舒晓锐,刘志鲲,孙杰,荆树举,张宏博. 废旧轮胎碎片(TDA)复合填料中竖向锚定板承载特性[J]. 山东大学学报 (工学版), 2023, 53(6): 92-99.
[3] 于洋,石南,高磊,赵国浩,张峰. 预应力混凝土空心板梁抗剪承载力分析[J]. 山东大学学报 (工学版), 2023, 53(3): 88-95.
[4] 宋修广, 杨鹤, 陈晓燕, 崔文杰, 岳红亚, 张恺, 田隽. 砂土中浅埋竖向锚定板极限承载力[J]. 山东大学学报 (工学版), 2021, 51(1): 24-31.
[5] 林超,张程林,王勇. 预应力中空棒构件设计与力学特性[J]. 山东大学学报 (工学版), 2020, 50(5): 26-32.
[6] 江健宏,杨振宇,陈奇,孟庆宇,张宏博. 预应力对拉式挡土墙受力特征模型试验研究[J]. 山东大学学报 (工学版), 2019, 49(4): 61-69.
[7] 董旭,郭剑,周海灿,邓振全,李树忱. 轨道交通U形梁底板横向抗裂及预应力布置研究[J]. 山东大学学报 (工学版), 2019, 49(4): 44-50.
[8] 陈晓涛,张进生,黄波,鞠军伟,张百年,赵佳琦. 金刚石圆锯片基体辊压预应力处理工艺参数试验研究[J]. 山东大学学报 (工学版), 2019, 49(3): 103-107.
[9] 周新波1,徐向锋2*,张峰3,孙家龙3,齐广志3. 箱梁竖向预应力张拉力无损检测研究[J]. 山东大学学报(工学版), 2013, 43(6): 77-82.
[10] 李守凯,张峰,李术才*,邵冬亮. 施工定位误差对竖向预应力损失的影响研究[J]. 山东大学学报(工学版), 2011, 41(3): 101-105.
[11] 李海燕 李伟 李术才 刘玉萍 高祀敏. 新型高预应力锚杆支护技术的研究及应用[J]. 山东大学学报(工学版), 2008, 38(6): 51-54.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 李 侃 . 嵌入式相贯线焊接控制系统开发与实现[J]. 山东大学学报(工学版), 2008, 38(4): 37 -41 .
[2] 来翔 . 用胞映射方法讨论一类MKdV方程[J]. 山东大学学报(工学版), 2006, 36(1): 87 -92 .
[3] 余嘉元1 , 田金亭1 , 朱强忠2 . 计算智能在心理学中的应用[J]. 山东大学学报(工学版), 2009, 39(1): 1 -5 .
[4] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81 -85 .
[5] 王波,王宁生 . 机电装配体拆卸序列的自动生成及组合优化[J]. 山东大学学报(工学版), 2006, 36(2): 52 -57 .
[6] 张英,郎咏梅,赵玉晓,张鉴达,乔鹏,李善评 . 由EGSB厌氧颗粒污泥培养好氧颗粒污泥的工艺探讨[J]. 山东大学学报(工学版), 2006, 36(4): 56 -59 .
[7] Yue Khing Toh1 , XIAO Wendong2 , XIE Lihua1 . 基于无线传感器网络的分散目标跟踪:实际测试平台的开发应用(英文)[J]. 山东大学学报(工学版), 2009, 39(1): 50 -56 .
[8] 孙炜伟,王玉振. 考虑饱和的发电机单机无穷大系统有限增益镇定[J]. 山东大学学报(工学版), 2009, 39(1): 69 -76 .
[9] 岳远征. 远离平衡态玻璃的弛豫[J]. 山东大学学报(工学版), 2009, 39(5): 1 -20 .
[10] 程代展,李志强. 非线性系统线性化综述(英文)[J]. 山东大学学报(工学版), 2009, 39(2): 26 -36 .