您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2011, Vol. 41 ›› Issue (1): 12-16.

• 机器学习与数据挖掘 • 上一篇    下一篇

基于背景差分法和显著性图的海底目标检测方法

王秀芬,王汇源,王松   

  1. 山东大学信息科学与工程学院,   山东 济南 250100
  • 收稿日期:2010-05-03 出版日期:2011-02-16 发布日期:2010-05-03
  • 作者简介:王秀芬(1984- ),女,山东德州人,硕士,主要研究方向为模式识别、计算机视觉. E-mail:wangxiufen2005@yahoo.com.cn
  • 基金资助:

    国家自然科学基金资助项目(60872119);山东省自然科学基金资助项目(2009ZRB01675)

Underwater object detection based on background subtraction and a saliency map

WANG Xiu-fen, WANG Hui-yuan, WANG Song   

  1. School of Information Science and Engineering,Shandong University, Jinan 250100, China
  • Received:2010-05-03 Online:2011-02-16 Published:2010-05-03

摘要:

如何完整地提取视频中低对比度的小目标一直是运动目标检测中的热点和难点,尤其是处理水下移动设备拍摄的海底视频,更是具有很大挑战性。针对海底视频的特点,提出一种结合背景差分法和显著性图理论的弱小目标检测方法。该方法对减去背景后仍不清晰的含有目标的视频帧,采用显著性图理论提高目标的对比度,以利于更好地分割目标与背景;同时,利用单帧视频中最大目标个数的先验知识,来判断视频中是否有目标出现,避免因杂质太多而造成目标的错检,以提高检测系统的稳定性。在此基础上进行了与常规背景差分法的比较实验,结果显示该方法能够更好地检测到不清晰的目标。

关键词: 背景差分法, 显著性图, 运动目标检测

Abstract:

Detecting small low-contrast targets is a difficult hotspot, especially in underwater videos captured by moving remoteoperated vehicles. According to the features of seabed videos, a small-targets detection method based on background subtraction and a saliency map was proposed. The saliency map was used to improve the contrast of targets that were still not clear enough after background subtraction and to make them easier to be segmented from the background. Whether or not the targets appeared in the video was determined with the prior knowledge about the largest number of subjects in a singleframe to avoid wrong detection and improve the stability of the detection system. Experimental results showed that unclear objects could be better detected with the proposed method than with conventional background subtraction.

Key words: background subtraction, saliency map, moving target detection

[1] 吕行,史忠科 . DirectShow框架下实时运动目标检测与跟踪方法的研究与应用[J]. 山东大学学报(工学版), 2007, 37(6): 5-9 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王素玉,艾兴,赵军,李作丽,刘增文 . 高速立铣3Cr2Mo模具钢切削力建模及预测[J]. 山东大学学报(工学版), 2006, 36(1): 1 -5 .
[2] 李 侃 . 嵌入式相贯线焊接控制系统开发与实现[J]. 山东大学学报(工学版), 2008, 38(4): 37 -41 .
[3] 孔祥臻,刘延俊,王勇,赵秀华 . 气动比例阀的死区补偿与仿真[J]. 山东大学学报(工学版), 2006, 36(1): 99 -102 .
[4] 来翔 . 用胞映射方法讨论一类MKdV方程[J]. 山东大学学报(工学版), 2006, 36(1): 87 -92 .
[5] 余嘉元1 , 田金亭1 , 朱强忠2 . 计算智能在心理学中的应用[J]. 山东大学学报(工学版), 2009, 39(1): 1 -5 .
[6] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81 -85 .
[7] 王波,王宁生 . 机电装配体拆卸序列的自动生成及组合优化[J]. 山东大学学报(工学版), 2006, 36(2): 52 -57 .
[8] 李可,刘常春,李同磊 . 一种改进的最大互信息医学图像配准算法[J]. 山东大学学报(工学版), 2006, 36(2): 107 -110 .
[9] 季涛,高旭,孙同景,薛永端,徐丙垠 . 铁路10 kV自闭/贯通线路故障行波特征分析[J]. 山东大学学报(工学版), 2006, 36(2): 111 -116 .
[10] 浦剑1 ,张军平1 ,黄华2 . 超分辨率算法研究综述[J]. 山东大学学报(工学版), 2009, 39(1): 27 -32 .