您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2008, Vol. 38 ›› Issue (6): 41-47.

• 论文 • 上一篇    下一篇

计算面向对象程序切片技术研究

杜林 江海燕   

  1. 山东教育学院计算机科学与技术系, 山东 济南 250013
  • 收稿日期:2007-12-23 出版日期:2008-12-16 发布日期:2008-12-16
  • 作者简介:杜林(1978-),男,山东济南人,助教,硕士研究生,研究方向为程序切片技术. E-mail:dul1028@163.com

A study of computing object-oriented program slicing  technology

  1. Department of Computer, Shandong Education University, Jinan 250013, China
  • Received:2007-12-23 Online:2008-12-16 Published:2008-12-16

摘要:

提出了把波动效应分析和系统依赖图结合起来进行切片的方法,通过波动效应分析反映面向对象程序中单元间的波动关系,基于系统依赖图切片侧重于分析控制依赖和数据依赖.分析了面向对象程序中的波动效应,扩展了粗粒度切片的含义,并且把波动结果映射到切片中.通过构造类图和改造传统系统依赖图来构造面向对象系统依赖图.分别给出了波动效应分析、构造系统依赖图以及切片的算法实现,并进行了复杂度分析.

关键词: 程序切片;波动效应;系统依赖图

Abstract:

A new object-oriented program slicing method was presented, which combines ripple effect analysis and system dependency graph. This method can be used to analyze the semantic relations in object-oriented program units by ripple effect analysis, and the control dependency and data dependency by use of system dependency graph. The ripple effect in an object-oriented program was studied. The coarse-grained signification was extended to a larger level and integrated slicing, and the ripple effect analysis through transforming results of ripple effect was extended to the sentence level. The objectoriented program system dependency graph was constructed by the class graph and the modifying traditional system dependency graph. The algorithms for analyzing ripple effect, constructing system dependency graph and computing slicing were designed. In addition, the complexity degrees of the algorithms were discussed.

Key words: program slice; ripple effect; system dependency graph

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 李 侃 . 嵌入式相贯线焊接控制系统开发与实现[J]. 山东大学学报(工学版), 2008, 38(4): 37 -41 .
[2] 施来顺,万忠义 . 新型甜菜碱型沥青乳化剂的合成与性能测试[J]. 山东大学学报(工学版), 2008, 38(4): 112 -115 .
[3] 来翔 . 用胞映射方法讨论一类MKdV方程[J]. 山东大学学报(工学版), 2006, 36(1): 87 -92 .
[4] 余嘉元1 , 田金亭1 , 朱强忠2 . 计算智能在心理学中的应用[J]. 山东大学学报(工学版), 2009, 39(1): 1 -5 .
[5] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81 -85 .
[6] 王波,王宁生 . 机电装配体拆卸序列的自动生成及组合优化[J]. 山东大学学报(工学版), 2006, 36(2): 52 -57 .
[7] 秦通,孙丰荣*,王丽梅,王庆浩,李新彩. 基于极大圆盘引导的形状插值实现三维表面重建[J]. 山东大学学报(工学版), 2010, 40(3): 1 -5 .
[8] 张英,郎咏梅,赵玉晓,张鉴达,乔鹏,李善评 . 由EGSB厌氧颗粒污泥培养好氧颗粒污泥的工艺探讨[J]. 山东大学学报(工学版), 2006, 36(4): 56 -59 .
[9] Yue Khing Toh1 , XIAO Wendong2 , XIE Lihua1 . 基于无线传感器网络的分散目标跟踪:实际测试平台的开发应用(英文)[J]. 山东大学学报(工学版), 2009, 39(1): 50 -56 .
[10] 孙炜伟,王玉振. 考虑饱和的发电机单机无穷大系统有限增益镇定[J]. 山东大学学报(工学版), 2009, 39(1): 69 -76 .