您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版)

• 论文 • 上一篇    下一篇

充液弹性管束流固耦合系统模态分析

郑继周,程林,杜文静   

  1. 山东大学空间热科学研究中心,山东济南250061
  • 收稿日期:2007-03-08 修回日期:1900-01-01 出版日期:2007-08-24 发布日期:2007-08-24
  • 通讯作者: 郑继周

Modal analysis of liquid-filled elastic tube bundles

ZHENG Ji-zhou,CHENG Lin,DU Wen-jing   

  1. Center for Space Thermal Science,Shandong University,Jinan 250061,China
  • Received:2007-03-08 Revised:1900-01-01 Online:2007-08-24 Published:2007-08-24
  • Contact: ZHENG Ji-zhou

摘要: 作为一种新型换热元件,弹性管束结构与管内流体构成了一个典型的流固耦合系统.考虑流体的可压缩性,用有限元法的位移-压力格式对管束-流体耦合系统进行离散,建立了系统的振动控制方程.在此基础上分别对管束结构、管内流体和管束-流体耦合系统进行了模态计算.结果表明:由于流体与结构的相互作用,不但弹性管束结构和流体本身的固有频率和振型发生改变,而且一个子系统的振动还会迫使另一子系统产生新的振动模式.不同密度的流体对结构频率改变的影响程度不同.因此,在研究管内充液弹性管束的动态响应时必须考虑流体与管束结构的相互作用影响.

关键词: 弹性管束, 流固耦合, 模态, 有限元法

Abstract: The structure of elastic tube bundles and the fluid inside constitute a typical fluid-structure interaction system. The governing vibration equation of the system is derived from the displacement-pressure format and the finite element models are built by considering the compressibility of the fluid. Natural frequencies and modal shapes of the structure, the fluid inside and the structure-fluid system are calculated separately. The results show that not only the natural frequencies and mode shapes of the original structure and fluid are changed due to the interaction between fluid and structure, but also one subsystem is forced to vibrate in a particular pattern corresponding to the vibration of the other subsystem. The effects of fluids with different densities on the structure are also different. The influence of fluid-structure interaction must be taken into account when the dynamic response of elastic tube bundles is studied.

Key words: elastic tube bundles, fluid-structure interaction, modal analysis, finite element method

中图分类号: 

  • TB53
[1] 王旭峰, 周迪,张风雷,宋雪萌,刘萌. 基于多粒度对齐网络的图像-文本匹配方法[J]. 山东大学学报 (工学版), 2025, 55(4): 29-39.
[2] 刁振宇,韩小凡,张承宇,聂慧佳,赵秀阳,牛冬梅. 基于实例判别与特征增强的单图三维模型检索[J]. 山东大学学报 (工学版), 2025, 55(2): 71-77.
[3] 谭智方,董飞,卢鹏宇,潘嘉男,聂秀山,尹义龙. 基于跨模态注意力哈希学习的视频片段定位方法[J]. 山东大学学报 (工学版), 2025, 55(1): 58-65.
[4] 李伟豪,王苹苹,许万博,魏本征. 结构先验引导的多模态腰椎MRI图像分割算法[J]. 山东大学学报 (工学版), 2025, 55(1): 66-76.
[5] 聂秀山,巩蕊,董飞,郭杰,马玉玲. 短视频场景分类方法综述[J]. 山东大学学报 (工学版), 2024, 54(3): 1-11.
[6] 徐金华,罗义凯,李昱燃,李岩. 基于时频分解与深度学习的轨道客流预测[J]. 山东大学学报 (工学版), 2024, 54(2): 60-68.
[7] 于艺旋,杨耕,耿华. 连续复合运动的多模态层次化关键帧提取方法[J]. 山东大学学报 (工学版), 2023, 53(2): 42-50.
[8] 武新章,梁祥宇,朱虹谕,张冬冬. 基于CEEMDAN-GRA-PCC-ATCN的短期风电功率预测[J]. 山东大学学报 (工学版), 2022, 52(6): 146-156.
[9] 杨霄,袭肖明,李维翠,杨璐. 基于层次化双重注意力网络的乳腺多模态图像分类[J]. 山东大学学报 (工学版), 2022, 52(3): 34-41.
[10] 戚翔,冯翔健,熊骋望,孙子正,张一鸣. 低雷诺数下近自由液面圆柱流致振动数值模拟与机理[J]. 山东大学学报 (工学版), 2022, 52(3): 51-60.
[11] 霍兵强,周涛,陆惠玲,董雅丽,刘珊. 基于NRC和多模态残差神经网络的肺部肿瘤良恶性分类[J]. 山东大学学报 (工学版), 2020, 50(6): 59-67.
[12] 王志伟,葛楠,李春伟. 基于BP神经网络算法的结构振动模态模糊控制[J]. 山东大学学报 (工学版), 2020, 50(5): 13-19.
[13] 田枫, 李欣, 刘芳, 李闯, 孙小强, 杜睿山. 基于多模态子空间学习的语义标签生成方法[J]. 山东大学学报 (工学版), 2020, 50(3): 31-37.
[14] 常致富,周风余,王玉刚,沈冬冬,赵阳. 基于深度学习的图像自动标注方法综述[J]. 山东大学学报 (工学版), 2019, 49(6): 25-35.
[15] 王晓光,何壮,李显富,潘奥. 磁悬浮旋翼驱动磁场对支承磁场的影响[J]. 山东大学学报 (工学版), 2019, 49(4): 86-92.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王素玉,艾兴,赵军,李作丽,刘增文 . 高速立铣3Cr2Mo模具钢切削力建模及预测[J]. 山东大学学报(工学版), 2006, 36(1): 1 -5 .
[2] 李 侃 . 嵌入式相贯线焊接控制系统开发与实现[J]. 山东大学学报(工学版), 2008, 38(4): 37 -41 .
[3] 孔祥臻,刘延俊,王勇,赵秀华 . 气动比例阀的死区补偿与仿真[J]. 山东大学学报(工学版), 2006, 36(1): 99 -102 .
[4] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81 -85 .
[5] 李可,刘常春,李同磊 . 一种改进的最大互信息医学图像配准算法[J]. 山东大学学报(工学版), 2006, 36(2): 107 -110 .
[6] 季涛,高旭,孙同景,薛永端,徐丙垠 . 铁路10 kV自闭/贯通线路故障行波特征分析[J]. 山东大学学报(工学版), 2006, 36(2): 111 -116 .
[7] 浦剑1 ,张军平1 ,黄华2 . 超分辨率算法研究综述[J]. 山东大学学报(工学版), 2009, 39(1): 27 -32 .
[8] 秦通,孙丰荣*,王丽梅,王庆浩,李新彩. 基于极大圆盘引导的形状插值实现三维表面重建[J]. 山东大学学报(工学版), 2010, 40(3): 1 -5 .
[9] 王丽君,黄奇成,王兆旭 . 敏感性问题中的均方误差与模型比较[J]. 山东大学学报(工学版), 2006, 36(6): 51 -56 .
[10] 孙殿柱,朱昌志,李延瑞 . 散乱点云边界特征快速提取算法[J]. 山东大学学报(工学版), 2009, 39(1): 84 -86 .