Journal of Shandong University(Engineering Science) ›› 2019, Vol. 49 ›› Issue (3): 114-119.doi: 10.6040/j.issn.1672-3961.0.2018.529

• Chemistry and Environment • Previous Articles     Next Articles

Life cycle assessment-based water footprint analysis of paper making wastewater

Donglu YANG(),Xiaotian MA,Jinglan HONG*()   

  1. School of Environmental Science and Engineering, Shandong University, Qingdao 266237, Shandong, China
  • Received:2018-12-07 Online:2019-06-20 Published:2019-06-27
  • Contact: Jinglan HONG E-mail:ydl1224480287@outlook.com;hongjing@sdu.edu.cn
  • Supported by:
    国家重点研发计划(2017YFF0206702);山东大学基础研究基金(2015JC016)

Abstract:

The paper industry suffered serious environmental impacts and high resource consumption, and lacked an effective method to quantify the potential environmental impacts. The water footprint method was applied to different scenarios of wastewater treatment to conduct analyses at the inventory level and the environmental impact level. Results showed that wastewater without disposal scenario had the highest water footprint value, which was 36.4 m3. After the improvement of wastewater treatment, the impact of water footprint decreased significantly. The water footprint of the wastewater disposal via oxidation ditch technology was 4.82 m3, which reduced to 1.52 m3 after the technical updating. Among these scenarios, the updated wastewater treatment combined sludge pyrolysis gasification had the lowest water footprint value (0.87 m3). For the wastewater treatment updated scenarios, direct water footprint was the dominant contributor to aquatic eutrophication and water scarcity. Sewage sludge treatment was the key process to carcinogens, non-carcinogens, and freshwater ecotoxicity. Meanwhile, the consumption of chemicals, electricity, and hydrochloric acid contributed partly to the overall potential impact. It was useful to save water resource and reduce water footprint by optimizing the use of freshwater and improving the efficiency of chemicals consumption.

Key words: water footprint, life cycle assessment, paper making wastewater disposal, sewage sludge, thermal pyrolysis

CLC Number: 

  • X384

Fig.1

System boundary"

Fig.2

Water footprint analysis result"

Fig.3

Normalized analysis at the mid-point level"

Fig.4

Key processes contribution of updated wastewater treatment technology"

Fig.5

Key substances of grey water footprint"

Table 1

Sensitivity analysis"

分类 单位 直接水足迹 化学药品 下水污泥处置
变动范围 5% 5% 5% 5%
水体富营养化 kg PO4-eq 1.24×10-5 5.27×10-7 3.01×10-7
水稀缺 m3 0.007 1.16×10-4 1.19×10-5
非致癌性影响 CTUh 0 1.80×10-10 1.18×10-7
淡水生态毒性 CTUe 0 0.20 0.34
1 中国造纸协会. 中国造纸工业2016年度报告[J]. 纸和造纸, 2017, 23 (6): 20- 31.
China Paper Association . China paper industry 2016 annual report[J]. Paper and Paper Making, 2017, 23 (6): 20- 31.
2 The Statistics Portal. Global paper production distribution by region[EB/OL]. (2015-12-01)[2019-03-06]. https://www.statista.com/topics/1701/paper-industry/.
3 Food and Agriculture Organization.Pulp and paper capacities 2006—2016[EB/OL]. (2016-08-17)[2019-03-06]. http://www.fao.org/forestry/statistics/81757/en/.
4 GEMECHU E , BUTNAR I , GOMA-CAMPS J , et al. A comparison of the GHG emissions caused by manufacturing tissue paper from virgin pulp or recycled waste paper[J]. International Journal Life Cycle Assessment, 2013, 18 (8): 1618- 1628.
doi: 10.1007/s11367-013-0597-x
5 DELGADO M , TARRES O , PELACH M , et al. Are cellulose nanofibers a solution for a more circular economy of paper products[J]. Environmental Science and Technology, 2015, 49 (20): 12206- 12213.
6 MASTERMAK A , RYBACZEWSKA M . Life cycle analysis of tissue paper manufacturing from virgin pulp or recycled waste paper[J]. Management and Production Engineering Review, 2015, 6 (16): 47- 54.
7 王洁, 贾学桦, 张亮. 新形势下造纸行业存在的环境问题及面临的环保新要求[J]. 造纸科学与技术, 2018, 37 (1): 6- 10.
WANG Jie , JIA Xuehua , ZHANG Liang . The environmental problems and new requirements in paper industry under new situation[J]. Paper Science and Technology, 2018, 37 (1): 6- 10.
8 杨科.晨鸣纸业发展战略研究[D].济南:山东大学, 2014.
YANG Ke. Development strategy research of Chenming paper industry[D]. Jinan: Shandong University, 2014.
9 BAJPAI P . Management of pulp and paper mill waste cham[M]. Zurich, Switzerland: Springer International Publishing, 2015: 9- 15.
10 OLLER I , MALATO S , SANCHEZ-PERE J . Combination of advanced oxidation processes and biological treatments for wastewater deconta-mination-a review[J]. Science of the Total Environment, 2011, 20 (409): 4141- 4166.
11 National Bureau of Statistics of the People's Republic of China.Environmental statistics[EB/OL]. (2014-12-06)[2018-12-29]. http://www.stats.gov.cn/ztjc/ztsj/hjtjzl/2014/201608/t20160831_1395064.html/.
12 HONG J , LI X . Environmental assessment of recycled printing and writing paper:a case study in China[J]. Waste Management, 2012, 32 (2): 264- 270.
doi: 10.1016/j.wasman.2011.09.026
13 王振德, 黄兆松, 蒋丽, 等. 铁载体在假交替单胞菌Cd2+去除中的作用[J]. 山东大学学报(工学版), 2018, 48 (4): 122- 127.
WANG Zhende , HUANG Zhaosong , JIANG Li , et al. Role of siderophore produced by Pseudoaltermonas sp. SCSE709-6 in the removal of Cd2+[J]. Journal of Shandong University (Engineering Science), 2018, 48 (4): 122- 127.
14 INCE B , CETECIOGLU Z , INCE O . Pollution prevention in the pulp and paper industries[M]. Environmental Management in Practice. Istanbul, Turkey: InTech, 2011: 223- 246.
15 AL-KAABI Z , PRADHAN R , THEVATHASAN N , et al. Potential value added applications of black liquor generated at paper manufacturing industry using recycled fibers[J]. Journal of Cleaner Production, 2017, 17 (149): 156- 163.
16 DEVIATKIN I , KAPUSTINA V , VASILIEVA E , et al. Comparative life cycle assessment of deinking sludge utilization alternatives[J]. Journal of Cleaner Production, 2016, 4 (112): 3232- 3243.
17 KLOPFFER W . Peer (expert) review in lca according to setac and iso 14040[J]. The International Journal of Life Cycle Assessment, 1997, 7 (4): 183- 184.
18 BAI X , REN X , KHANNA N Z , et al. Comprehensive water footprint assessment of the dairy industry chain based on iso 14046: a case study in china[J]. Resources, Conservation and Recycling, 2018, 2 (132): 369- 375.
19 BERGER M , WARSEN J , KRINKE S , et al. Water footprint of European cars:potential impacts of water consumption along automobile life cycles[J]. Environmental Science and Technology, 2012, 46 (7): 4091- 4099.
doi: 10.1021/es2040043
20 HUIJBREGTS M , HAUSCHILD M , JOLLIET O , et al. USEtoxTM user manual[J]. The International Journal of Life Cycle Assessment, 2010, (12): 5- 23.
21 LI X , YANG Y , XU X , et al. Air pollution from polycyclic aromatic hydrocarbons generated by human activities and their health effects in China[J]. Journal of Cleaner Production, 2016, 11 (112): 1360- 1367.
22 ZHANG Y , SUN M , HONG J , et al. Environment footprint of aluminum production in China[J]. Journal of Cleaner Production, 2016, 20 (133): 1242- 1251.
23 PLOUFFE G, BULLE C, DESCHENES L, et al. Including metal speciation in LCA terrestrial ecotoxicity: new regionalised characterization factors[C]//SETAC Europe 22nd Annual Meeting.Berlin, German: 6th SETAC World Congress, 2012: 540-547.
24 BERGER M , VANDERENT R , EISNER S , et al. Water accounting and vulnerability evaluation (wave):considering atmospheric evaporation recycling and the risk of freshwater depletion in water footprinting[J]. Environmental Science and Technology, 2014, 48 (8): 4521- 4528.
doi: 10.1021/es404994t
[1] ZHANG Ruirui, MA Xiaotian, HONG Jinglan, CHANG Jingcai. Water footprint of lead-acid battery throughout the whole life cycle [J]. Journal of Shandong University(Engineering Science), 2020, 50(4): 114-118.
[2] WANG Xiao-Wei, LI Jian-Feng, LI Fang-Yi, WANG Li-Ming. A life cycle assessment indicators system and quantification methods of electromechanical products [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(5): 73-78.
[3] JIANG Feng,LI Qing-hai,LI Jian-feng,LI Fang-yi,WEI Baokun, . The assessment of the packaging materials' environmental friendlycharacter based on the LCA methodology [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(6): 10-13 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 108 -112 .
[2] ZHANG Gong-xiao,YANG Rong-hua . Synthesis and characterization of salicylaldehyde methylthiosemicarbazone Schiff base complexes[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(3): 108 -111 .
[3] LUO Yun-hu,XING Li-dong,WANG Qin,LIU Hai-chun,WENG Xiao-guang . Coordination of bidding strategies for two kinds of interruptible load reserve markets on demand side[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(3): 77 -80 .
[4] ZHENG Gui-lan,GUAN Rui-fang,SUI Su,LI Jian-quan,LI Guo-zhong . Study on discrimination effect of reactive and reflective road coating[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(1): 86 -89 .
[5] SUN Zong-yao,LIU Yun-gang . Adaptive output feedback stabilization for a class of second-dimensional uncertain nonlinear systems[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(5): 34 -39 .
[6] SONG Ming-da,WANG Wei-qiang,LI Meng-li,XU Shu-gen . Non-destructive evaluation of multilayer wrapped urea reactors[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(4): 50 -54 .
[7] ZHANG Xiao, LI Shu-Cai, ZHANG Qiang-Song, LIU Qin, ZHANG Ning, LIU Bin. Research in  field tests  of the influence factors of the TSP system signal collection quality[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(4): 25 -29 .
[8] HAN Xue. Example analysis for landslide hazard remote monitoring at  the Pingzhuang west open-pit mine[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(4): 116 -120 .
[9] LIAO Huo-mu,DONG Zeng-chuan,SHU Long-cang,YUN Ru-an . Combinative time series analysis method for the prediction  of the groundwater level[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(2): 96 -100 .
[10] LI Yong, YANG Qiang, ZHU Wei-shen, LI Shu-cai, ZHANG Qiang-yong, WANG Han-peng. The strain measurement techniques based on the static resistive strain gauge and optical fiber strain sensor and their applications in geo-mechanical model tests[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(3): 129 -134 .