JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2018, Vol. 48 ›› Issue (1): 78-88.doi: 10.6040/j.issn.1672-3961.0.2017.022

Previous Articles     Next Articles

Analysis and design optimization of the performance in flexible lever mechanism for static unbalance measurement system

MIAO Huihua1, LI Peixing1, HU Baizhen2, ZHANG Jiankun2, YAN Weixin1, ZHAO Yanzheng1*   

  1. 1. Research Inst. of Robotics, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China;
    2. Shanghai Aerospace Control Technology Institute, Shanghai 201109, China
  • Received:2017-01-13 Online:2018-02-20 Published:2017-01-13

PDF (PC)

438

Abstract: Based on the centroid projection method and flexible mechanism, a set of static unbalance measurement system was designed as well as reducing the flexible lever output flexibility, which could effectively improve the accuracy of measurement by analyzing the measuring principle and components characteristics. The flexible lever flexibility model was established by the circular flexure hinge closed equation, then the finite element analysis software Ansys was used to verify the exactness of the flexibility model. Through reasonable optimization function and constraint conditions, the performance of the input and output in flexible lever mechanism were optimized. The result showed that it was feasible to establish the model flexibility by using the closed-form equation. The error between theoretical value and simulation value was within 9%, and the optimization function was feasible. Under the premise that variation of the lever amplification coefficient was only 2%, leverage output flexibility was reduced by 18.63%. The optimizing result showed that the leverage linearity range was increased to effectively improve the measuring accuracy of static unbalance measurement system.

Key words: closed-form equation, second-order lever, static imbalance measurement, flexible hinge, flexibility model

CLC Number: 

  • TH823
[1] 徐春夷. 国外导引头技术现状及发展趋势[J]. 制导与引信,2012,33(2):11-15. XU Chunyi. The present state and development trend of foreign seeker technology[J]. Guidance & Fuze, 2012, 33(2):11-15.
[2] 吉清, 袁佳, 邓显池. 空空导弹导引头新型视线稳定平台综述[J]. 中国科技信息,2013(8):56. JI Qing, YUAN Jia, DENG Xianchi. Summary about new-type LOS stabilized platform of air-to-air missile[J]. China Science and Technology Information, 2013(8):56.
[3] 李汉. 机载转台视轴稳定系统的研究[D]. 长春:长春理工大学,2007. LI Han. The research of the airborne rotary view axis stabilizating systems[D]. Changchun: Changchun University of Science and Technology, 2007.
[4] 夏静平. 多框架稳定跟踪伺服平台控制技术研究[D]. 南京:南京航空航天大学, 2010. XIA Jingping. Research on control technology of multi-frame tracking and stabilization servo platform[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2010.
[5] MANINI A K, AGRAWAL V. Test system for comprehensive evaluation of infrared-guided missiles[J]. IET Trans Optoelectronics, 2012, 6(5):255-262.
[6] WANG L,ZHANG B,LEI W. The simulation experiment of laser jamming on CCD imaging seeker[J].Journal of Projectiles,Rockets,Missiles and Guidance, 2012, 32(1): 41-44.
[7] BEEBE J C. Method and apparatus utilizing static imbalance to reduce vibration caused by tire/wheel assemblies and tire/wheel assembly made using same: USA 07/695572[P]. 1993-08-17.
[8] LEE H P. Scan loop design for a spin-stabilized seeker[J]. IEE Proc.: Control Theory Appl, 1998, 145(2):119-126.
[9] WALDMANN J. Line-of-sight rate estimation and linearizing control of an imaging seeker in a tactical missile guided by proportional navigation[J]. IEEE Trans Control Syst Technol, 2002, 10(4): 556-567.
[10] 詹世涛,崔宇,闫维新. 二轴框架平台动力学特性及其可镇定性的研究[J]. 上海航天,2013,30(3): 6-10. ZHAN Shitao, CUI Yu, YAN Weixin. Dynamics modeling and stabilization analysis of a two-axis ginmbaled system[J]. Aerospace Shanghai, 2013, 30(3): 6-10.
[11] LUO Q, LI D, ZHOU W. Dynamic modelling and observation of micro-vibrations generated by a single gimbal control moment gyro[J]. Journal of Sound and Vibration, 2013, 332(19): 4496-4516.
[12] OTLOWSKI D R, WIENER K, RATHBUN B A. Mass properties factors in achieving stable imagery from a gimbal mounted camera[C] //SPIE Defense and Security Symposium.[S.l.] : International Society for Optics and Photonics, 2008.
[13] BOYNTON R, WIENER P K, KENNEDY P, et al. Static balancing a device with two or more degrees of freedom: the key to obtaining high performance on gimbaled missile seekers[C] //the 62nd Annual Conference of Society of Allied Weight Engineers. New Haven, USA: Society of Allied Weight Engineers, Inc., 2003: 24-28.
[14] LI T Q, NETHERCOT D, CHOO B S. Behaviour of flush end-plate composite connections with unbalanced moment and variable shear/moment ratios I: experimental behaviour[J]. Journal of Constructional Steel Research,1996, 38(2): 125-164.
[15] LI T Q, NETHERCOT D A, CHOO B S. Behaviour of flush end-plate composite connections with unbalanced moment and variable shear/moment ratios II: prediction of moment capacity[J]. Journal of Constructional Steel Research, 1996, 38(2): 165-198.
[16] 于爽,付庄,赵辉. 惯性平台不平衡力矩测试方法及补偿控制[J]. 上海交通大学学报,2008,42(10):1692-1696. YU Shuang, FU Zhuang, ZHAO Hui. Measurement method and compensation control for unbalanced moment of inertial platform[J]. Journal of Shanghai Jiao Tong University, 2008, 42(10):1692-1696.
[17] ZHAN S T, YAN W X, FU Z. Robust control of a yaw-pitch gimballed seeker[J]. Aircraft Engineering and Aerospace Technology: An International Journal, 2015, 87(1): 83-91.
[18] HOWELL L L. Compliant mechanisms[M].New Jersey, USA:John Wiley & Sons, 2001.
[19] LOBONTIU N, PAINE J S N, O'MALLEY E, et al. Parabolic and hyperbolic flexure hinges: Flexibility,motion precision and stress characterization based on compliance closed-form equations[J]. Precision Engineering, 2002, 26(2): 183-192.
[20] 邓文昊,张建坤,钱志源. 静不平衡力矩测量装置的误差分析与实验验证[J]. 机电一体化,2015(4): 23-26. DEN Wenhao, ZHANG Jiankun, QIAN Zhiyuan. Error analysis and experimental verification of the measuring equipment of static unbalance moment[J]. Mechatronics, 2015(4):23-26.
[21] SMITH S T, CHETWYND D G, BOWEN D K. Design and assessment of monolithic high precision translation mechanisms[J]. Journal of Physics E: Scientific instruments, 1987, 20(8):977.
No related articles found!
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd